Adaptec xhub4 Quick Setup Guide

The following sections explain how to personalize your Adaptec XHub. 

Adding a Photo (Plus models only)

You can place a photo or your favorite artwork behind the frame plate.

Remove the frame plate (as shown on 

The clear plastic photo cover is underneath the frame plate.

Cut your photo (or other image) to the proper size.
The photo must be 2” by 2” to fit the frame. 

You can trace around the photo cover for an exact fit.

Place your photo in the hub, and place the photo cover over it.

Replace the frame plate by sliding it under the top tab and then 
gently pushing the bottom of the frame plate into the hub until the 
latch snaps closed.

You can find more customization options at the Adaptec Web site. Go to 

www.adaptec.com/usb

.