Adaptec xhub4 User Manual

USB 2.0 driver software with hub support must be installed on 
your computer for the XHub for Notebooks to operate at USB 2.0 
speeds. If you are using an Adaptec USB 2.0 controller, install the 
USB 2.0 drivers provided on the XHub for Notebooks CD.

The drivers provided on the XHub for Notebooks CD 

will not work with non-Adaptec USB 2.0 controllers. Refer to 
your controller’s manufacturer for driver information.

Follow the instructions for your Operating System (OS) to install 
the USB 2.0 drivers:

■

For Windows 2000, Windows Me, or Windows 98SE, see below.

■

For Windows XP, see 

■

For Macintosh, see 

.

Adaptec strongly recommends that you always use the 

most recent drivers to maximize your XHub’s performance. 
Regularly check the Adaptec website at 

www.adaptec.com

 for 

the most up-to-date USB 2.0 drivers.

Turn on your computer and connect your AUH-4100 (see 

 for instructions). Insert the XHub for 

Notebooks CD into your CD-ROM drive. Windows loads the 
driver automatically.

To ensure that the driver has installed properly:

On your desktop, double-click My Computer.

Double-click Control Panel.

Double-click System. The System Properties window opens.

Open Device Manager.

Adaptec USB 2.0 Hub should appear under Universal Serial Bus 
controllers.

XHub for Notebooks UG Book.book  Page 5  Wednesday, July 17, 2002  3:48 PM