Adaptec 7220ss User Guide
3-4
Monitoring System Status
Capturing the Event Log File
The entire event log can be saved to a file, which is useful if you
want to print the log or attach it to an email message.
want to print the log or attach it to an email message.
These instructions assume that you are using HyperTerminal as
the terminal emulator software. If you are using a different
terminal emulator, your procedure may be different.
the terminal emulator software. If you are using a different
terminal emulator, your procedure may be different.
To capture the event log file:
1
With HyperTerminal up and running as your RS-232 interface
terminal, press CTRL-E until the Event Log appears.
terminal, press CTRL-E until the Event Log appears.
2
From the Transfer menu in HyperTerminal, select Capture Text.
The Capture Text window appears.
3
Type the path and file name you want to use to store the log file
contents.
contents.
4
Click Start.
5
Press P on the keyboard to begin the transfer.
6
From the Transfer menu in HyperTerminal, select Capture Text.
The Capture Text window appears.
7
Click Stop.
Displaying Hardware and Configuration
Information
Information
You can display the controller’s hardware and configuration
information two ways:
information two ways:
■
Hardware information only
■
Hardware and configuration information
lists the configuration information that is available.