American Dynamics edvr Operating Guide
EDVR Installation and Operation Guide
50
EDVR
Record Settings
This page enables you to set the recording rate and recording quality, and enables you to set the audio sampling
rate and the channel mode.
rate and the channel mode.
Advanced Settings
1 Alarm Settings
Enter
2 Record Settings
Enter
3 Motion Settings
Enter
4 Camera Covert
Enter
5 Operation Locks
Enter
6 Communication
Enter
7 Disk Setup
Enter
8 Schedule
Enter
9 Dome Settings
Enter
Return
menu: exit
enter: select
/
: item
>
Record Settings
1 Record Quality
Enter
2 Normal Record Rate
30 F/S
3 Audio Sampling Rate
44K Hz
4 Audio Channel Mode
Stereo
Return
menu: exit
enter: select
shuttle: value
/
: item
1. Record Quality
You can enter and set each channel's record quality at 4 different levels of recording images from Best, High,
Standard, and Basic.
Standard, and Basic.
2. Normal Record Rate
The rate range is 1 to 60 F/S for NTSC and 1 to 50 F/S for PAL (F/S is fields per sec, same as images
per sec or IPS as images are not interlaced).
per sec or IPS as images are not interlaced).
3. Audio Sample Rate
This item has four options: 44K Hz, 22K Hz, 8K Hz, and Disable.
4. Audio Channel Mode
The options here are Stereo (two channels with the same input), and Left Input and Right Input (two channels
which work separately).
which work separately).
Return
Go back to the previous page.