American Dynamics edvr Operating Guide
Configuration Menus
59
Schedule
Enter the Schedule Settings menu to configure up to 8 schedules. A schedule can change the recording settings
as well as the alarm settings at designated times. Users can set alarm, record, and motion preferences to
override normal alarm, record, and motion settings during a scheduled record period. Use the shuttle ring to
choose Enable or Disable for each schedule.
as well as the alarm settings at designated times. Users can set alarm, record, and motion preferences to
override normal alarm, record, and motion settings during a scheduled record period. Use the shuttle ring to
choose Enable or Disable for each schedule.
Note
If there are any conflicts between the schedules, a schedule with a smaller (lower) number has priority over a
schedule with a higher (larger) number. For example, if there is a conflict between schedules 1 and 2, the
EDVR will use the values in schedule 1.
schedule with a higher (larger) number. For example, if there is a conflict between schedules 1 and 2, the
EDVR will use the values in schedule 1.
Advanced Settings
1 Alarm Settings
Enter
2 Record Settings
Enter
3 Motion Settings
Enter
4 Camera Covert
Enter
5 Operation Locks
Enter
6 Communication
Enter
7 Disk Setup
Enter
8 Schedule
Enter
9 Dome Settings
Enter
Return
menu: exit
enter: select
/
: item
>
Schedule Settings
1 Schedule1
Enable Enter
2 Schedule2
Disable Enter
3 Schedule3
Disable Enter
4 Schedule4
Disable Enter
5 Schedule5
Disable Enter
6 Schedule6
Disable Enter
7 Schedule7
Disable Enter
8 Schedule8
Disable Enter
Return
menu: exit
enter: select
shuttle: value
/
: item
Enter the Schedule Settings page to adjust the following items:
Schedule Settings
1 Schedule1
Enable Enter
2 Schedule2
Disable Enter
3 Schedule3
Disable Enter
4 Schedule4
Disable Enter
5 Schedule5
Disable Enter
6 Schedule6
Disable Enter
7 Schedule7
Disable Enter
8 Schedule8
Disable Enter
Return
menu: exit
enter: select
shuttle: value
/
: item
>
Schedule Settings
1 Date
Everyday
2 Start Time
12:00AM
3 End Time
12:00AM+
4 Start Record
Yes
5 Alarm Settings
Disable Enter
6 Record Settings
Disable Enter
7 Motion Settings
Disable Enter
Return
menu: exit
enter: select
shuttle: value
/
/cam1~7: item
On the "Schedule Settings" page you have eight schedules, each of which has an identical "Settings" process.
You must first activate this by turning "Disable" to "Enable", then choose the corresponding "Enter" and press the
ENTER button on the front panel to enter your selected schedule's "Settings" page. The settings page has the
same format as all the other schedules, as follows:
You must first activate this by turning "Disable" to "Enable", then choose the corresponding "Enter" and press the
ENTER button on the front panel to enter your selected schedule's "Settings" page. The settings page has the
same format as all the other schedules, as follows: