American Dynamics edvr Operating Guide
EDVR Client Software
77
Connection Testing
After completing the previous settings, follow these instructions to ensure that you have established the
connection successfully.
connection successfully.
1. Click Start
Command Prompt
Note
If your PC is configured using the Classic Windows Start Menu, click Start
Accessories
Command
Prompt.
2. Type in
“
ping 192.168.0.1
”
then press Enter. (See the sample screen that follows.)
Note
This IP address is assigned for the connected EDVR. When connecting to a network, each connected
EDVR must be assigned a unique IP that must be in the same class type as your network address. IP
addresses are written as four sets of numbers separated by periods; for example, 192.168.1.1 Therefore, if
the connected network is identified as Class C, for example, the first three sets of numbers of the EDVR IP
address must be the same as the network address.
EDVR must be assigned a unique IP that must be in the same class type as your network address. IP
addresses are written as four sets of numbers separated by periods; for example, 192.168.1.1 Therefore, if
the connected network is identified as Class C, for example, the first three sets of numbers of the EDVR IP
address must be the same as the network address.