American Dynamics digital recorder Operating Guide
iii
Operating Instructions
WARNING: TO REDUCE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
DO NOT INSTALL THIS PRODUCT IN HAZARDOUS AREAS WHERE HIGHLY COMBUSTIBLE OR
EXPLOSIVE PRODUCTS ARE STORED OR USED.
EXPLOSIVE PRODUCTS ARE STORED OR USED.
UNIT HAS NO POWER SWITCH.
THE LIGHTNING FLASH/ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE,
ALERTS THE USER TO THE PRESENCE OF A SHOCK HAZARD WITHIN THE PRODUCT’S
ENCLOSURE.
ALERTS THE USER TO THE PRESENCE OF A SHOCK HAZARD WITHIN THE PRODUCT’S
ENCLOSURE.
WARNING: This equipment has been tested and found to comply with the limits for a Class “A” digital device, pursu-
ant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-
ence when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause interfer-
ence to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at their own expense.
ant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-
ence when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause interfer-
ence to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at their own expense.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
authority to operate the equipment.
NOTE: This product was FCC verified under test conditions that included the use of shielded I/O cables and connec-
tors between system components. To be in compliance with FCC regulations, the user must use shielded cables and
connectors for all except power and alarm cables.
tors between system components. To be in compliance with FCC regulations, the user must use shielded cables and
connectors for all except power and alarm cables.
This digital apparatus does not exceed the Class A limits for radio noise emissions as set out in the Radio Interfer-
ence Regulations (ICES-003) of the Canadian Department of Communications.
ence Regulations (ICES-003) of the Canadian Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables de la Classe A
prescrites dans le Réglement (ICES-003) sur le brouillage radioélectrique édicté par le Ministère des Communica-
tions du Canada.
prescrites dans le Réglement (ICES-003) sur le brouillage radioélectrique édicté par le Ministère des Communica-
tions du Canada.