American Dynamics ad1676b Installation Instruction
Pan/Tilt, Lens, and Auxiliary Control
When called on-screen, cameras at sites equipped with 1680
and/or 1640 Series Receivers are controlled as follows:
and/or 1640 Series Receivers are controlled as follows:
Pan and Tilt - Hold the joystick in the direction you wish to
move the camera. The camera will continue to move until the
joystick is centered.
move the camera. The camera will continue to move until the
joystick is centered.
Iris, Focus, and Zoom - Push and hold the function button
designating the desired action. The function will continue to
change as long as the button is depressed. Release the button
when the desired effect has been obtained.
designating the desired action. The function will continue to
change as long as the button is depressed. Release the button
when the desired effect has been obtained.
Auxiliaries - Momentary or Latching action of auxiliaries
depends on the options installed on the 1680 Series Receiver at
the site being controlled.
depends on the options installed on the 1680 Series Receiver at
the site being controlled.
1. Enter the auxiliary number
2. Press the AUX ON Button to activate the auxiliary.
3. Release the AUX ON button:
If auxiliary action stops the auxiliary is momentary.
If auxiliary action continues the auxiliary action is latching.
4. Press the AUX OFF button to deactivate a latching
auxiliary.
Note: The current state of latching functions such as locks or
gates is not indicated on the keyboard. If critical, operator
feedback should be provided via the monitor or some other
device.
gates is not indicated on the keyboard. If critical, operator
feedback should be provided via the monitor or some other
device.
KEYBOARD OPERATION
7