Revel f50 User Guide
Figure 2. The Revel Performa
F50a transducer and connection
locations.
F50a transducer and connection
locations.
PRODUCT REGISTRATION
Please register the F50a within 15 days of purchase. To do so,
register online at www.revelspeakers.com or complete and return
the included product registration card. Retain the original, dated
sales receipt as proof of warranty coverage.
register online at www.revelspeakers.com or complete and return
the included product registration card. Retain the original, dated
sales receipt as proof of warranty coverage.
DESCRIPTION
The Revel Performa F50a loudspeaker features a transducer comple-
ment (see Figure 2) of three 6.5-inch (165m) woofers, a 5.25-inch
(133mm) midrange driver, and a 1-inch (25.4mm) tweeter.
ment (see Figure 2) of three 6.5-inch (165m) woofers, a 5.25-inch
(133mm) midrange driver, and a 1-inch (25.4mm) tweeter.
Combined with an individually-optimized crossover network, this
transducer arrangement results in a superior off-axis response that
provides a large uniform listening area and an uncolored in-room
response, even in the presence of strong wall reflections.
transducer arrangement results in a superior off-axis response that
provides a large uniform listening area and an uncolored in-room
response, even in the presence of strong wall reflections.
WOOFERS
Each 6.5-inch (165mm) ceramic-composite cone woofer features:
• A ceramic cone that provides the advantages of stiff, light true
ceramic material through the use of a unique high temperature
process that results in a strong ceramic composite.
process that results in a strong ceramic composite.
• Little or no energy storage and no breakup modes throughout
its operating range, resulting in low distortion.
• Magnetic shielding to prevent interference with video monitors.
• A vented spider for better cooling and low compression.
4
REVEL PERFORMA F50a
Owner’s Manual
Install straps for
single-wire operation
Install straps for
single-wire operation
Low Frequency Input
High Frequency Input
Remove straps
for bi-wire
or bi-amp
for bi-wire
or bi-amp
+1
-1
0
+.5
-.5
Front Tweeter Level (dB)
Serial Number
xxxx
xxxx
Revel
Northridge, California
Made in U.S.A.
Northridge, California
Made in U.S.A.
REVEL PERFORMA F50a Front
(without grille)
REVEL PERFORMA F50a Rear
Tweeter
Woofer Port
Tweeter
Level Control
Level Control
Midrange
Woofers
Connectors (with
shorting straps)