Revel salon User Guide
Figure 14.
LF COMPENSATION
control settings versus
bass frequency response.
4. If desired, experiment with placement and try other LF COM-
PENSATION control settings to achieve the best overall tonal
balance, image specificity, and spaciousness. There is no right or
wrong placement or setting – only what sounds best.
balance, image specificity, and spaciousness. There is no right or
wrong placement or setting – only what sounds best.
NOTE: Rotating the LF PLACEMENT COMPENSATION
control to the left increases low-frequency output (see Figures 13
and 14).
control to the left increases low-frequency output (see Figures 13
and 14).
5. You may also wish to further adjust the HIGH FREQUENCY
LEVEL controls (see Figure 13 on previous page) for both
front and rear tweeters to achieve the most natural sound in
your room. Varying the FRONT control will change the high
frequency balance and timbre. Varying the REAR control will
mainly affect “air” and spaciousness.
front and rear tweeters to achieve the most natural sound in
your room. Varying the FRONT control will change the high
frequency balance and timbre. Varying the REAR control will
mainly affect “air” and spaciousness.
NOTE: Be certain the corresponding controls are set the same on
both left and right channels.
both left and right channels.
SALON
Owner’s Manual
17
19.531
4.0
dB
2.0
0.0
43.945
68.359
92.773
Log Frequency - Hz
– 2.0
– 4.0
0
+
LF Compensation
0
+
LF Compensation