Baumatic bfw1400 User Manual

Page of 40
 
24 
 
 
Cleaning the Cabinet 
9
  Clean the exterior surface of your machine with lukewarm water 
and a cleaning substance that will not harm or scratch the cabinet.  
After rinsing with clean water, wipe it with a soft and dry cloth. 
 
PLEASE NOTE:  If your washing machine is installed in a 
location where the ambient temperature can fall below 0 
°
C, do 
the following (once before you know your machine will be unused 
for a long time). 
 
o  Plug in your Washing Machine. 
o  Close the water tap and pull out the water inlet hose or hoses from 
the tap. 
o  Place the ends of the water drain and water inlet hoses in a cup on 
the ground. 
o  Set the Program Knob to ‘Draining’ program. 
o  The ‘Program Ready’ light will come on. 
o  Run the program by pressing the ‘Start/Pause’ button. 
o  Unplug your machine when the program is over (program end light 
is on). 
 
* When you complete this process, the remaining water inside the 
machine will be drained.  There will now be no danger of ice forming.  
When you use your washing machine again, be sure that the ambient 
temperature is above 0 
°
C. 
 
 
 
Cleaning the Drum 
 
*PLEASE NOTE:  Do not leave metal parts like needles, staples or 
coins inside your Washing Machine.  These items cause rust buildup in 
the drum.  To clean these stains away, use a cleaning substance (that 
doesn’t have chlorine in it) and follow the manufacturer’s guidelines.  
Never use dish-washing wires or similarly rough objects. 
 
  
 
*REMOVAL OF LIME FROM YOUR MACHINE 
If you use the right amount of detergent in your washing machine, 
there will be no need for lime removal.  However, if you want to use 
lime removers, please pay attention to their manufacturers’ warnings.