Plus bf-030 s Operating Guide
6
When a red line appears at the edges of the recording paper. The red line will
appear when there is only about one meter (3 feet) or so of recording paper left on
the roll.
When the paper out lamp lights red.
HOW TO USE
Note:
Please use only the correct type of recording paper.
Particular attention must be given to the winding direction of the recording paper, since
copying cannot be performed if the winding direction of the recording paper is reversed.
copying cannot be performed if the winding direction of the recording paper is reversed.
Be sure to keep the recording paper straight when loading, failure to do so may cause
wrinkling or tearing of the paper during the copy function.
wrinkling or tearing of the paper during the copy function.
Push both ends of the hatch
closed until it locks with a clicking
noise. At this time, make sure that
the recording paper has not
slipped.
closed until it locks with a clicking
noise. At this time, make sure that
the recording paper has not
slipped.
Replace the recording paper in the following situations
Cut off extra recording paper from
the printer outlet.
*Automatic Power Cut-off Function
If there is no key operation for about an hour, a fluorescent lamp inside the main unit automatically
goes off and the machine enters a state of power conservation. (At this time, the power lamp is lit.)
If at any time any key is pressed, the fluorescent lamp light again, and the normal operating
condition is restored.
goes off and the machine enters a state of power conservation. (At this time, the power lamp is lit.)
If at any time any key is pressed, the fluorescent lamp light again, and the normal operating
condition is restored.