Leviton 47611-gt4 User Guide

Internet Gateway User Guide 

34 

The hardware address of this device, as seen by remote devices 
on the Internet. (This is different to the hardware address seen by 
devices on the local LAN.) 

The IP Address of this device, as seen by Internet users. This 
address is allocated by your ISP (Internet Service Provider). 

The Network Mask associated with the IP Address above. 

This indicates whether or not the connection is currently estab-
lished. 
•  If the connection does not exist, the "Connect" button can be 

used to establish a connection. 

•  If the connection currently exists, the "Disconnect" button 

can be used to break the connection. 

•  The Connection Log shows status messages relating to the 

existing connection. 

•  The most common messages are listed in the table below. 
•  The "Clear Log" button will restart the Log, while the Re-

fresh button will update the messages shown on screen. 

If not connected, establish a connection to your ISP. 

If connected to your ISP, hang up the connection. 

Delete all data currently in the Log. This will make it easier to 
read new messages. 

Update the data on screen. 

 

Connect on Demand 

Connection attempt has been triggered by the "Connect 
automatically, as required" setting. 

Manual connection 

Connection attempt started by the "Connect" button. 

Reset physical connection 

Preparing line for connection attempt. 

Connecting to remote 
server 

Attempting to connect to the ISP's server. 

Remote Server located 

ISP's Server has responded to connection attempt. 

Start PPP 

Attempting to login to ISP's Server and establish a PPP 
connection. 

PPP up successfully 

Able to login to ISP's Server and establish a PPP connection.