Blomberg dw14110 User Guide
6. OPERATING THE DISHWASHER
CAUTION
WARNING
On/Off button
Turn your dishwasher on with the On/Off
button. When turning on, the icon on the
display module of the last used program
will light up.
Start/Pause button
Use this button to start the selected
program; the light on the button lights up.
Stop the program with the Start/Pause
button if you would like to open the door
once the dishwashers washing program
is running.
Cycle Select button
Use the Cycle Select button to select the
desired program. The diode of the
corresponding program will light up.
On / Off
Start /
Pause
5 6
7
8
4
3
2
1
1. Open the door by pulling the door handle. 7
2. Load the dishwasher.
3. Check that both upper and lower spray arms
2. Load the dishwasher.
3. Check that both upper and lower spray arms
move freely.
4. Fill enough detergent into the detergent
dispenser and close the lid.
5. Use the On/Off button 8 to turn the dishwasher
on.
6. Check the rinse aid level indicator light. 2
If necessary, refill rinse aid.
(depending on model)
(depending on model)
7. Check the salt level indicator light 3 If
necessary, refill salt. (depending on model)
8. Use the Cycle Select button 5 to choose your
washing program.
9. Start the program with the Start/Pause button.
6
10. When the progress indicator light End 4
lights up , the wash cycle is completed. Use
the On/Off button 8 to turn the dishwasher
off.
11. Allow your dishes to cool for 20 minutes, with
the door open.
12. Unload the dishes. Begin with the lower rack.
HOW TO USE YOUR DISHWASHER:
Avoid opening the door during the washing
process. This interrupts the washing process,
and hot steam will escape. Hot steam can cause
burns and other serious injuries. When the door
is closed, the program will continue.
FUNCTION BUTTONS
Cancellation of a program
To cancel a program while the
dishwasher is running:
1. Press Start/Pause button for 5
1. Press Start/Pause button for 5
seconds. The indicator light will start
flashing.
2. The dishwasher will drain the water
inside the machine for 45 seconds.
3. The program is cancelled when
indicator light goes off.
4. Then, you can choose and start a
new program.
Depending on the stage of the program
you have cancelled, there may be
detergent residue or rinse aid inside
the machine and on the dishes. Make
sure the items in the dishwasher are
not used before washing properly.
Ingestion or inhalation of detergent or
rinse aid may cause serious injury.
Avoid contact with skin and eyes and
keep children and infirm persons away
from these materials.
Cycle
Select
4 Program follow up lights
5 Cycle Select button
6 Start/Pause button
6 Start/Pause button
1 Program lights
2 Rinse aid level indicator light
*
3 Salt level indicator light
*
7 Door handle
8 On/Off button
11
*
Depending on model