Pharos gps 600 Quick Setup Guide
Getting Your GPS Phone 600
Ready to Go
Ready to Go
1. Insert the SIM card
T urn over the GPS Phone 600 and remove the back cove r .
Insert the SIM card in the back of the GPS Phone 600 with
the gold contacts facing down.
Insert the SIM card in the back of the GPS Phone 600 with
the gold contacts facing down.
2. Insert the battery
Place the battery in the back of the GPS Phone 600, making
sure that the plastic tabs are aligned with the corresponding
holes. Gently insert the battery until it snaps into place.
Remember to lock the battery into place. Then replace the
back cover.
sure that the plastic tabs are aligned with the corresponding
holes. Gently insert the battery until it snaps into place.
Remember to lock the battery into place. Then replace the
back cover.
3. Charge the battery
Connect the AC charger to the mini USB port to fully charge
the GPS Phone 600. This will take about 8 hours the first
time. The battery is fully charged when the light on the top
right front of the GPS Phone 600 turns green.
the GPS Phone 600. This will take about 8 hours the first
time. The battery is fully charged when the light on the top
right front of the GPS Phone 600 turns green.
Reset
Reset method: Push in the “Reset Button” located to the
side of the GPS Phone 600 with the tip of the stylus.
Appropirate situation: If the GPS Phone 600 is unable to maintain
normal operation, has no response, or if the screen is frozen.
side of the GPS Phone 600 with the tip of the stylus.
Appropirate situation: If the GPS Phone 600 is unable to maintain
normal operation, has no response, or if the screen is frozen.