Funkwerk bintec 1200wu & Card-Bus expansion slot 24228 User Manual

Product codes
24228
Page of 5
 
bintec R1200wu
 
The bintec 1200wu is a fully equipped, versatile and flexible
multi-protocol router with automatic ISDN backup and UMTS/HSDPA
option. It was specially developed for high-speed Internet access and
can also be used for remote access in small to medium-sized
enterprises or in remote offices. Standard features include a 4-port
switch and an Ethernet port for WAN access; this router also comes
complete with 10 IPSec tunnels including hardware acceleration. Up
to 100 additional IPSec tunnels can be added to the system with the
purchase of the corresponding license. The second integrated ISDN
BRI interface can also be activated optionally with the purchase of a
license.
The basic version of R1200wu offers an SIP Application Level Gateway, enabling it to be connected directly
to IP telephones in the network or registered with the VoIP provider. The R1200wu automatically controls
the firewall, which makes it considerably easier to configure. It has also been conveniently equipped with a
DSP slot for use as a VoIP media gateway.
As a wireless router, the bintec R1200wu supports the 802.11a/b/g/h standards with a gross transfer rate of
54 Mbps. The use of UMTS / HSDPA cards via the extension interface enable internet access with up to
1,8 Mbps for data and voice solutions - independent of the location. In addition to WEP encryption, the
secure WPA or WPA2 modes for the use of preshared keys or the integration into a Radius server are
available to guarantee secure data transmission via the air interface. Access is controlled on the port level
via 802.1x. The multi-SSID function makes it possible for build several different user groups, each with their
own guidelines. The WDS function (Wireless Distribution System) can be used to create wireless
infrastructures for application scenarios in which a wired solution would be too expensive or technically
impossible.
The devices can be configured using either the HTTP Configuration Wizard (recommended for
inexperienced users) or via an HTML user interface.