Panasonic AG-HVX200 User Guide

Reset the system microcomputer if you can no 
longer operate the camera-recorder even though 
its power is on or a similar kind of a problem has 
occurred.
Use a pointed object to press the RESET button on 
the camera-recorder.
The menu setting entered and memory contents 
will not be cleared even when the system is reset.

Do not press the RESET button when the camera-
recorder is operating normally.

When cleaning, do not use benzene or thinner.
•  Using benzine or paint thinners may deform the 

camera-recorder and/or cause the surface finish 
to peel off.

•  Before proceeding with maintenance, remove the 

battery or disconnect the AC cord from the power 
outlet.

•  Use a soft, clean cloth to wipe the camera-

recorder. To remove stubborn dirt, wipe the 
camera-recorder with a cloth moistened with 
kitchen detergent that has been diluted with 
water and then use a dry cloth to take up the 
remaining moisture.

Cleaning the Viewfinder
If there is dust inside the view finder, remove the 
eye cup holder and get rid of the dust.
•  The interior of the eye cup holder is specially 

finished, so do not ever wipe it. If there is dust on 
it, blow it off with an air blower.

•  Remove the eye cup holder with the eye cup 

attached by rotating it counterclockwise. (It will 
be tightly screwed on.) When you do this, tilt the 
view finder slightly upward.

•  To amount the eye cup holder, align the ridges 

and grooves of the eye cup holder and camera-
recorder, and turn clockwise until the holder 
clicks into place.

CH 1 SELECT CH 2 SELECT

INPUT 1

INPUT 2

INT(L)

INPUT 1
INPUT 2

INT(R)

INPUT 2

ON

OFF

BARS

AUDIO

SHUTTER

SPEED SEL

COUNTER RESET/TC SET

ZEBRA

OIS

RESET

ON

OFF

MIC POWER +48V