Panasonic HX-A100 User Manual

VQT4X87

This unit can record motion pictures or still pictures to a microSD card.

Cards that you can use with this unit

Use microSD Memory Card (512 MB/1 GB/2 GB) or microSDHC Memory

Card

(4 GB/8 GB/

16 GB/32 GB)

conforming to Class 4

or higher of the SD Speed Class Rating

for motion

picture recording.
≥ Operation of microSD cards other than described above is not guaranteed.

Use microSD cards conforming to Class 6 or higher of the SD Speed Class Rating for
“Slow motion mode”. If you use microSD cards conforming to Class 4 or less of that, the
recording may stop suddenly.

≥ Keep the Memory Card out of reach of children to prevent swallowing.

Inserting/removing a microSD card

Caution:
Check that the access lamp

A has gone off.

≥ When this unit is accessing the microSD card (such as recognition, recording, playback and

deletion), the access lamp lights up.

C: Unlocked when the red indicator is visible

Slide the LOCK switch

B to the left to unlock the side cover and

slide the side cover downward to open it and then insert (remove)
the microSD card into (from) the card slot.

≥ Face the terminal side D upward and press it straight in as far as it will go.
≥ Press the center of the microSD card and then pull it straight out.

Close the side cover and slide the LOCK switch

B to the right to lock it.

≥ Close the side cover and slide it upward and then lock it.
≥ Securely close it until it clicks.

Recording to a card

SD Speed Class Rating is the speed standard regarding
continuous writing. Check via the label on the card, etc.

e.g.:

≥ Please check the latest information on the support website below.
http://panasonic.jp/support/global/cs/e_cam/index.html
(This website is in English only.)



HX-A100_VQT4X87_mst.book 18 ページ２０１３年１月２５日　金曜日　午前９時５５分