Panasonic DMC-FH4 User Guide

- 15 -

Remaining battery (only when using battery)

(flashes red)

If the battery mark flashes red, recharge or replace battery.

Estimated remaining pictures or recording time capacity

Displayed when no card is inserted (pictures will be saved to built-in memory)

 (Card) or 

 (Built-in memory) are illuminated red.

While the light remains lit, an operation is taking place, such as picture writing or reading. 
While the light is lit, do not turn off the power or remove battery, card, AC adaptor (for 
dealer display purpose only) or DC coupler (for dealer display purpose only), as this can 
cause data loss or damage. Do not subject the camera to vibrations, impact, or static 
electricity. Should any of these cause camera operation to be terminated, attempt to 
perform the operation again.

The number of pictures you can take and the recording time vary in proportion to card 
capacity (and depending on recording conditions and type of card).

 

●

If you make Web upload settings, the recording picture capacity and the recording time 
capacity of the card may be reduced.

■

∗

11

300

4910

9880

∗

12

330

5490

10980

25

650

10620

21490

390

10050

162960

247160

 

• When the number of recordable pictures exceeds 99,999, “+99999” is displayed.

■

∗

–

10m10s

2h47m00s

5h39m00s

∗

–

8m10s

2h14m00s

4h32m00s

–

21m40s

5h54m00s

11h56m00s

2m25s

1h02m00s

16h59m00s

34h21m00s

([h], [m] and [s] indicate “hour”, “minute” and “second”.)

 

• Motion pictures can be recorded continuously up to 2 GB. 

The maximum available recording time for up to 2 GB only is displayed on the screen.

∗

 DMC-S5    

∗

 DMC-FH6, DMC-FH4, DMC-S2