Panasonic dmc-fh7 User Guide

•

Refer to 

 for information about how to play back pictures.

•

When you play back pictures on a PC, they cannot be displayed in the rotated direction unless 
the OS or software is compatible with Exif. Exif is a file format for still pictures which allows 
recording information etc. to be added. It was established by “JEITA (Japan Electronics and 
Information Technology Industries Association)”.

•

It may not be possible to rotate pictures that have been recorded with other equipment.

•

The display is not rotated during Multi Playback.

•

Use a battery with sufficient battery power or the AC adaptor (optional) and DC coupler 
(optional) when formatting. Do not turn the camera off during formatting.

•

If a card has been inserted, only the card is formatted. To format the built-in memory, remove 
the card.

•

If the card has been formatted on a PC or other equipment, format it on the camera again.

•

It may take longer to format the built-in memory than the card.

•

If the built-in memory or the card cannot be formatted, consult your nearest Service Center.

M [Rotate Disp.]

This mode allows you to display pictures vertically if they were 
recorded holding the camera vertically.

It will rotate and display vertically.

It will display vertically only when playing back 
connected to a TV.

It is possible to check which version of firmware is on the camera.

The built-in memory or card is formatted. Formatting irretrievably 
deletes all the data so check the data carefully before formatting.

For Canadian assistance, please call:
1-800-99-LUMIX (1-800-995-8649) or 
send e-mail to: lumixconcierge@ca.panasonic.com

For USA and Puerto Rico assistance, please call:
1-800-211-PANA(7262) or, contact us via the web at: 
http://www.panasonic.com/contactinfo