Panasonic dmc-fs15 User Guide

Page of 120
VQT1W26
18
Preparation
Press [MENU/SET] to set.
• After completing the clock settings, turn the camera off. Then turn the camera back on, 
switch to Recording mode, and check that the display reflects the settings that were 
performed.
• When [MENU/SET] has been pressed to complete the settings without the clock having 
been set, set the clock correctly by following the “Changing the clock setting” procedure 
below.
Select [CLOCK SET] in the [REC] or [SETUP] menu, and press 
1. (P19)
• It can be changed in steps 
3
 and 
4
 to set the clock.
• The clock setting is maintained for 3 months using the built-in clock battery even 
without the battery. (Leave the charged battery in the unit for 24 hours to charge the 
built-in battery.)
Note
• The clock is displayed when [DISPLAY] is pressed several times during recording.
• You can set the year from 2000 to 2099.
• If the clock is not set, the correct date cannot be printed when you stamp the date on the 
pictures with [TEXT STAMP] (P74) or order a photo studio to print the pictures.
• If the clock is set, the correct date can be printed even if the date is not displayed on the screen 
of the camera.
Setting the Menu
The camera comes with menus that allow you to set the settings for taking pictures and 
playing them back just as you like and menus that enable you to have more fun with the 
camera and use it more easily.
In particular, the [SETUP] menu contains some important settings relating to the camera’s 
clock and power. Check the settings of this menu before proceeding to use the camera.
A [REC]/[PLAYBACK] selector switch
Changing the clock setting
DMC-FS15PPC-VQT1W26_eng.book  18 ページ  2008年12月8日 月曜日 午後7時19分