Panasonic dmc-fs15 User Guide

Page of 120
VQT1W26
44
Advanced (Recording pictures)
[REC] mode: 
·
¿
Taking Pictures using Auto Bracket
In this mode, 3 pictures are automatically recorded in the selected exposure 
compensation range each time the shutter button is pressed. You can select the picture 
with the desired exposure from the 3 pictures with different exposures.
With Auto bracket 
d1 EV
Note
• When setting Auto bracket, [
] appears on the screen.
• When taking pictures using Auto bracket after setting the exposure compensation range, the 
pictures taken are based on the selected exposure compensation range.
When the exposure is compensated, the exposure compensation value appears on the lower 
left of the screen.
• The Auto bracket setting is canceled if you turn the camera off or [POWER SAVE] is activated.
• When Auto bracket is set, the Auto review function is activated regardless of the Auto review 
setting. (The picture is not enlarged.) You cannot set the Auto review function in the [SETUP] 
menu.
• The exposure may not be compensated with Auto bracket depending on the brightness of the 
subject.
• [Œ] is set for the flash when Auto bracket is set.
• Burst is canceled when Auto bracket is set.
• Auto bracket cannot be used when in [TRANSFORM], [HI-SPEED BURST], [FLASH BURST], 
[STARRY SKY], [PIN HOLE], [FILM GRAIN] and [PHOTO FRAME] in Scene mode.
 
1st picture
 
2nd picture
 
3rd picture
d0 EV
j1 EV
i1 EV
Press 
3 [È] several times until [AUTO BRACKET] 
appears, set the compensation range of the 
exposure with 
2/1.
• When you do not use Auto bracket, select [OFF] (0).
Press [MENU/SET] to finish.
• You can also press the shutter button halfway to finish.
DMC-FS15PPC-VQT1W26_eng.book  44 ページ  2008年12月8日 月曜日 午後7時19分