Panasonic DMC-FX700 User Guide
Others
- 184 -
Care of the camera
•
•
Do not touch the lens or the sockets with dirty hands. Also, be careful not to allow
liquids, sand and other foreign matter to get into the space around the lens, buttons etc.
liquids, sand and other foreign matter to get into the space around the lens, buttons etc.
•
Do not strongly shake or bump the camera by dropping or hitting it. Do not subject to
strong pressure.
The camera may malfunction, recording pictures may become impossible, or the lens, the LCD
monitor or the external case may be damaged.
strong pressure.
The camera may malfunction, recording pictures may become impossible, or the lens, the LCD
monitor or the external case may be damaged.
•
We strongly recommend you do not leave the camera in your trousers pocket
when you sit down or forcefully insert it into a full or tight bag etc.
Damage to the LCD monitor or personal injury may result.
when you sit down or forcefully insert it into a full or tight bag etc.
Damage to the LCD monitor or personal injury may result.
•
Do not attach any other items to the hand strap that’s supplied with your
camera. While being stored, that item can rest against the LCD monitor and
damage it.
camera. While being stored, that item can rest against the LCD monitor and
damage it.
•
Be particularly careful in the following places as they may cause this
unit to malfunction.
unit to malfunction.
–
Places with a lot of sand or dust.
–
Places where water can come into contact with this unit such as when using
it on a rainy day or on a beach.
it on a rainy day or on a beach.
•
This camera is not waterproof. If water or seawater splashes on the camera, use a dry
cloth to wipe the camera body carefully.
If the unit does not operate normally, please contact the dealer where you purchased the
camera or the repair service center.
cloth to wipe the camera body carefully.
If the unit does not operate normally, please contact the dealer where you purchased the
camera or the repair service center.
About Condensation (When the lens or the LCD monitor is fogged up)
•
•
Condensation occurs when the ambient temperature or humidity changes. Be careful of
condensation since it causes lens or LCD monitor stains, fungus and camera malfunction.
condensation since it causes lens or LCD monitor stains, fungus and camera malfunction.
•
If condensation occurs, turn the camera off and leave it for about 2 hours. The fog will
disappear naturally when the temperature of the camera becomes close to the ambient
temperature.
disappear naturally when the temperature of the camera becomes close to the ambient
temperature.