Panasonic dmc-fx5 User Manual

Page of 132
Others
115
Troubleshooting
1:
The camera is not turned on.
1-1: Are the battery inserted or the AC 
adaptor correctly connected? 
Check the connection.
1-2: Is the battery sufficiently charged? 
Use a sufficiently charged battery.
2:
As the camera is turned on, it 
turns off immediately.
2:
Is the battery charge insufficient to 
operate the camera?
Use a sufficiently charged battery.
3:
The brightness of the screen 
changes dark or bright for a 
moment.
3:
This phenomenon appears when 
pressing the shutter button 
halfway to set the aperture value 
and does not affect the recorded 
pictures.
4:
The picture cannot be recorded.
4-1: Is the card inserted?
4-2: Is the mode dial correctly set? 
Check it.
4-3: There is no memory capacity left 
on the card. Before recording, 
delete some pictures.
5:
The picture is not displayed on 
the LCD monitor.
5:
Is the LCD monitor set to OFF?
Press the [DISPLAY] button 
several times to switch to LCD 
monitor display.
6:
The screen is too bright or dark.
6:
Adjust the brightness of the 
screen.
7:
Flash is not activated.
7:
The flash mode is set to forced 
OFF. Change the flash mode.
8:
Unreadable language was 
selected by mistake.
8:
Select [
] icon on the [SETUP] 
menu to set the desired language.
9:
The subject is not focused 
properly.
9-1: The focus range depends on the 
recording mode. Set the mode dial 
to the mode corresponding to the 
distance to the subject.
9-2: Set the [AF TRIGGER] to 
[
].
10:
The picture is not played back.
10-1: Is the card inserted?
10-2: Is there a picture in the card?
10-3: Is the mode dial set to playback 
[
]?
SHUTTER
FX5_FX1-PP.book  115 ページ  2003年12月15日 月曜日 午後1時27分