Panasonic dmc-fz30 User Manual

Preparation

VQT0R81

Inserting/Removing the Battery

• Check that the camera is turned off.
• Close the flash.

1 Slide the release lever in the

direction of the arrow to open the
battery door

• Please be sure to use genuine

Panasonic batteries (CGR-S006A).

2 Insert:

Insert the charged battery until it
clicks.

Remove:
Slide the lock

B to remove the

battery.

3 1 Close the battery door.

2 Slide the release lever as far as

it will go in the direction of the
arrow to close the battery door
firmly.

• If you will not be using the camera for a

long time, remove the battery.

• When a fully charged battery has been

inserted for more than 24 hours, the clock
setting is stored (in the camera) for at
least 3 months even if the battery is
removed. (The storing time may be
shorter if the battery is not charged
sufficiently.)
If more than 3 months has passed, the
clock setting will be lost. In this case, set
the clock again. (P20)

• Do not remove the card and the battery

while the card is being accessed. The
data on the card may be damaged.
(P16)

• Do not remove the battery with the

camera turned on since the settings on
the camera may not be stored properly.

• The supplied battery is designed only

for the camera. Do not use it with any
other equipment.

OPEN

OSE

OPEN

OSE

OPEN

OSE