Panasonic dmc-ls1 User Manual

Page of 112
Recording pictures (basic)
40
VQT0Q58
Taking Pictures using the Built-in Flash
When you set the flash, you can take 
pictures using the built-in flash according to 
the recording condition.
A: Photo flash
Do not cover it with your finger or any other 
items.
∫ Switching to the appropriate flash 
setting
For the selectable flash settings, refer to 
“Available flash settings by recording 
mode” on P41.
: AUTO
The flash is automatically activated 
according to the recording condition.
: AUTO/Red-eye reduction
The flash is automatically activated 
according to the recording condition.
It reduces the red-eye phenomenon (eyes 
of the subject appear red in the picture) by 
triggering the flash before actually 
recording the picture. After that, the flash is 
activated for actual recording again.
• The flash is activated 2 times. The first 
flash is activated only for a preparation 
of actual recording. The subject should 
not move until the second flash is 
finished.
• Use this when you take pictures of 
people in low lighting conditions.
: Forced ON
The flash is activated every time regardless 
of the recording condition.
• Use this when your subject is back-lit 
or under fluorescent light.
: Forced ON/Red-eye reduction
• The flash setting is set to Forced ON/
Red-eye reduction only when you set 
to [PARTY] in scene mode. (P57)
: Slow sync./Red-eye reduction
When you take a picture with a dark 
background landscape, this feature makes 
the shutter speed slow when the flash is 
activated, so that the dark background 
landscape will become bright. 
Simultaneously it reduces the red-eye 
phenomenon.
• Use this when you take pictures of 
people in front of a dark background.
: Forced OFF
The flash is not activated in any recording 
condition.
• Use this when you take pictures in 
places where the use of the flash is not 
permitted.
SCN
1
SCN
2
VQT0Q58ENG.book  40 ページ  2005年2月3日 木曜日 午後7時0分