Panasonic dmc-lz10 User Guide
100
VQT1L86
Connecting to other equipment
Connecting to a PC
By connecting the camera to a computer,
you can upload your pictures, then
use the software on the included CD-
ROM ([PHOTOfunSTUDIO-viewer-] for
Windows
you can upload your pictures, then
use the software on the included CD-
ROM ([PHOTOfunSTUDIO-viewer-] for
Windows
®
) to print or send your images
by e-mail.
If you use Windows 98/98SE, install
the USB driver and then connect the
camera to the computer.
For details, refer to the operating
instructions (PDF fi le) of the software.
If you use Windows 98/98SE, install
the USB driver and then connect the
camera to the computer.
For details, refer to the operating
instructions (PDF fi le) of the software.
Turn on the camera and the PC.
Connect the camera to a PC via
the USB connection cable C
(supplied).
Connect the camera to a PC via
the USB connection cable C
(supplied).
The screen to select [PictBridge (PTP)]
or [PC] is displayed.
If [USB MODE] in setup menu is set to
other than [SELECT ON CONNECTION],
the screen is not displayed
or [PC] is displayed.
If [USB MODE] in setup menu is set to
other than [SELECT ON CONNECTION],
the screen is not displayed
( P23 )
.
C
B
D
A
DIGITAL
AV OUT
E
ACCESS
A
AC adaptor (DMW-AC6PP: optional)
B
DC coupler (DMW-DCC2: optional)
Use batteries with suffi cient battery
power or the AC adaptor A and the
DC coupler B.
power or the AC adaptor A and the
DC coupler B.
•
•
•
1
2
2
•
•
•
Always use a genuine Panasonic AC
adaptor (DMW-AC6PP: optional) and
DC coupler (DMW-DCC2: optional).
Make sure the camera is off before
connecting or disconnecting the AC
adaptor.
adaptor (DMW-AC6PP: optional) and
DC coupler (DMW-DCC2: optional).
Make sure the camera is off before
connecting or disconnecting the AC
adaptor.
C
USB connection cable (supplied)
Connect the USB connection cable
with the [
with the [
c
] mark facing the [q]
mark on the [DIGITAL] socket.
D
This message appears during data
transfer.
E
Check the facing of the connector and
push straight in.
Hold E and then insert or pull the USB
connection cable straight. Do not try
to force the connector in backwards or
sideways. This can damage this unit and
the equipment you are connecting.
connection cable straight. Do not try
to force the connector in backwards or
sideways. This can damage this unit and
the equipment you are connecting.
Select [PC] using r and press
[MENU/SET].
[MENU/SET].
[Windows]
The drive appears on the [My Computer]
folder.
The drive appears on the [My Computer]
folder.
If it is the fi rst time you are connecting
the camera to a PC, the required driver is
installed automatically so that the camera
can be recognized by the Windows Plug
and Play, then it appears on the [My
Computer] folder.
the camera to a PC, the required driver is
installed automatically so that the camera
can be recognized by the Windows Plug
and Play, then it appears on the [My
Computer] folder.
[Macintosh]
The drive is displayed on the screen.
The drive is displayed on the screen.
The drive is displayed as [LUMIX] when you
connect the camera with no card inserted.
The drive is displayed as [NO_NAME] or
[Untitled] when you connect the camera
with a card inserted.
connect the camera with no card inserted.
The drive is displayed as [NO_NAME] or
[Untitled] when you connect the camera
with a card inserted.
•
•
•
•
3
•
•
•
VQT1L86_DMC-LZ10_P-PC.indd 100
VQT1L86_DMC-LZ10_P-PC.indd 100
2008/01/21 9:39:09
2008/01/21 9:39:09