Panasonic DMC-TS5 User Manual

Page of 43
VQT4T99 (ENG)
8
Before Use
Do not apply strong shock or vibration by dropping or knocking the camera. Also, do 
not apply strong pressure to the camera.
Waterproof performance may be impaired.
Lens or LCD monitor may be damaged.
It may cause malfunction in the performance or the function.
∫ When inner side of the lens is fogged (condensation)
This unit has been designed to prevent condensation by 
Anti-fog glass, however it may be caused by the 
environment in which the camera is used. It is not a 
malfunction or failure of the camera.
What to do when inner side of the lens is fogged
Turn off the power and open the side door in a place with constant 
ambient temperature, away from high temperatures, humidity, sand and dust. The fog will 
disappear naturally in 10 minutes to 2 hours with the side door open when the temperature of 
the camera gets close to the ambient temperature.
Contact Panasonic if the fogging does not disappear.
Conditions in which inner side of the lens may be fogged
Condensation may occur and the inner side of the lens may be fogged when the 
camera is used in areas that undergo a significant change in temperature or in high 
humidity, such as the following:
When the camera is used underwater suddenly after being on a hot beach etc.
When the camera is moved to a warm area from a cold area, such as at a ski resort or 
at high altitude
When the side door is opened in a high-humidity environment
Please be sure to read 
(Important) About the Waterproof/Dustproof and Anti-shock 
Performance of the Camera
 (P10) before using this unit underwater to prevent the 
unit from being mishandled, which may cause water to seep in.
DMC-FT5&TS5P-VQT4T99_eng.book  8 ページ  2013年1月7日 月曜日 午後2時53分