Panasonic AG-DVX100 User Guide
CAUTION:
This unit will operate on 110/120/220/240V AC. An
AC plug adapter may be required for voltages other
than 120V AC.
If a conversion plug is required, consult with your
dealer as to which one is to be purchased.
AC plug adapter may be required for voltages other
than 120V AC.
If a conversion plug is required, consult with your
dealer as to which one is to be purchased.
22
Mounting the battery
1
Raise the viewfinder.
2
Push the battery straight in, and slide it
downward until it clicks into position.
downward until it clicks into position.
3
Return the viewfinder to its original
position.
position.
5
Return the viewfinder to its original
position.
position.
Supplying power from the AC adapter
1
Raise the viewfinder.
2
Push the battery-type connector on the
DC cable straight in, and slide it
downward until it clicks into position.
DC cable straight in, and slide it
downward until it clicks into position.
3
Connect the DC cable to the AC adapter.
4
Connect the AC cable to the power outlet.
Removing the battery
While pressing the battery eject button, slide
the battery upward to remove.
While pressing the battery eject button, slide
the battery upward to remove.
O
Set the POWER switch to OFF, and check
that the CAMERA/VCR lamp has gone off
before removing the battery.
that the CAMERA/VCR lamp has gone off
before removing the battery.
O
Support the battery with your hand to
ensure that it will not drop.
ensure that it will not drop.
1
2
3
Battery eject button
1
3
4
2
Connect the AC adapter correctly as
shown in the figure.
shown in the figure.
O
The battery cannot be charged while
supplying power from the AC adapter to the
camera recorder.
supplying power from the AC adapter to the
camera recorder.