Panasonic AJ-HPX3000 User Guide
18
Parts and their Functions
:Shooting and Recording/Playback Functions Section
1.
CC FILTER/ND FILTER (filter switching)
controls
controls
These are used to select the filter in accordance with
the subject’s brightness and color temperature.
the subject’s brightness and color temperature.
CC FILTER knob (outside, large diameter)
A : 3200K
B : 4300K
C : 5600K
D : 6300K
ND FILTER knob (inside, small diameter)
1 : CLEAR (transparent)
2 : 1/4 ND
3 : 1/16 ND
4 : 1/64 ND
2.
USER MAIN, USER 1 and USER 2 buttons
These buttons can be assigned user-selected
functions, using a menu option. Each button, when
pressed, performs the assigned function.
For more information, see [Assigning Functions to
USER MAIN, USER1 and USER2 Buttons
functions, using a menu option. Each button, when
pressed, performs the assigned function.
For more information, see [Assigning Functions to
USER MAIN, USER1 and USER2 Buttons
3.
SHUTTER switch
Used to enable or disable the electronic shutter.
OFF:
Electronic shutter disabled.
ON:
Electronic shutter enabled.
SEL:
Used to change the speed of the electronic
shutter.
shutter.
This dial switch returns to its original position. Each
turn of the switch alters the shutter speed.
For more information, see [Setting the Electronic
Shutter
turn of the switch alters the shutter speed.
For more information, see [Setting the Electronic
Shutter
4.
AUTO W/B (white/black) BAL switch
AWB: White balance is automatically adjusted.
When the WHITE BAL switch on the side is
positioned at [A] or [B], the adjusted value is
stored in the memory.
Note that when the switch is positioned at
[PRST] this function does not work.
positioned at [A] or [B], the adjusted value is
stored in the memory.
Note that when the switch is positioned at
[PRST] this function does not work.
ABB: Back balance is automatically adjusted.
The automatic adjustment function of the black
shading can be assigned to this switch by
turning on the SHD.ABB SW CTL item on the
<SW MODE> page through menu operation.
(Refer to page 178)
shading can be assigned to this switch by
turning on the SHD.ABB SW CTL item on the
<SW MODE> page through menu operation.
(Refer to page 178)
Note
To stop automatic adjustment of the white or black
balance in progress, set the switch to either ([AWB] or
[ABB]).
If automatic adjustment is cancelled, the value in effect
before automatic adjustment will be used.
balance in progress, set the switch to either ([AWB] or
[ABB]).
If automatic adjustment is cancelled, the value in effect
before automatic adjustment will be used.
Shooting and Recording/Playback Functions Section
34
35
36
15
19
24
21
20
17
33
33
25
26
29
27
30
18
32
31
28
22 23
14
16
1
2
3
11
10 9
8
12
13
4
5
6
7
Shooting
conditions
CC FILTER
ND FILTER
Sunrise, sunset,
inside a studio
inside a studio
A (3200 K)
1 (CLEAR)
Outdoors under a
clear sky
clear sky
B (4300 K) or
C (5600 K) or
D (6300 K)
C (5600 K) or
D (6300 K)
2 (1/4 ND) or
3 (1/16 ND)
3 (1/16 ND)
Outdoors under
cloudy or rainy
skies
cloudy or rainy
skies
D (6300 K)
1 (CLEAR) or
2 (1/4 ND)
2 (1/4 ND)
Snowscapes, high
mountains,
seashores or
other perfectly
clear scenery
mountains,
seashores or
other perfectly
clear scenery
B (4300 K) or
C (5600 K) or
D (6300 K)
C (5600 K) or
D (6300 K)
3 (1/16 ND) or
4 (1/64 ND)
4 (1/64 ND)
AJ-HPX3000G(VQT1D27)E.book 18 ページ 2007年9月3日 月曜日 午後2時34分