Panasonic AJ-HPX3000 User Guide
30
Recording and Playback
：P2 Cards
Note
When using the camera-recorder for the first time, be sure
to set the time data beforehand. On how the time data is
set, see [Setting Time Data] (page 55).
to set the time data beforehand. On how the time data is
set, see [Setting Time Data] (page 55).
1
Turn on the POWER switch.
2
While pressing down the slide lock button, slide the
slide-out door to the left.
The door opens.
slide-out door to the left.
The door opens.
3
Insert a P2 card into the P2 card slot until the EJECT
button pops up.
button pops up.
4
Tilt up the popped-up EJECT button, to lock-in the P2
card.
card.
5
Insert a P2 card into camera-recorder. The P2 CARD
ACCESS LED for the appropriate slot indicates the
status of the P2 card.
For how the P2 card status is indicated, see [P2
CARD ACCESS LED and status of P2 cards] (page
31).
ACCESS LED for the appropriate slot indicates the
status of the P2 card.
For how the P2 card status is indicated, see [P2
CARD ACCESS LED and status of P2 cards] (page
31).
6
Close the slide-out door.
Note
Do not leave the slide-out door open when moving
camera-recorder.
camera-recorder.
Inserting P2 Cards
POWER: ON
Slide lock
button
button
Slide-out door
EJECT button
The card must be
inserted with the
logo right way
up.
inserted with the
logo right way
up.
P2 CARD
ACCESS
LED
ACCESS
LED
Recording and Playback
P2 Cards
AJ-HPX3000G(VQT1D27)E.book 30 ページ ２００７年９月３日 月曜日 午後２時３４分