Panasonic AG-HPX370 User Manual

17

Chapter

7

Men
uOper

ations

PC MODE SELECT

Sets camera operating mode when PC MODE is set to 
ON and an external device is connected via USB. 
USB HOST: 

Selects USB 2.0 for connecting an 

external hard disk drive. (For details, refer to 
page 150.)
USB DEVICE: 

Makes it possible to connect the 

camera to a computer via USB 2.0 to enable use 
of a P2 card as mass storage.  (For details, refer to 
page 149.)

•  Not available when PC MODE is set 

to ON. 

PC MODE

Operates the camera according to mode selected 
using PC MODE SELECT. 
ON: 

Operates in PC MODE.

Terminates PC MODE and returns the camera to 

normal operation. 
•  This function is always set to OFF when the power is 

turned on. 

•  Not available when compiling to a clip 

in one-clip recording mode.

LOW GAIN

Sets the gain value assigned to the L position of the 
GAIN switch.
–3dB, 0dB, 3dB, 6dB, 9dB, 12dB

MID GAIN

Sets the gain value assigned to the M position of the 
GAIN switch. 
–3dB, 0dB, 3dB, 6dB, 9dB, 12dB

HIGH GAIN

Sets the gain value assigned to the H position of the 
GAIN switch. 
–3dB, 0dB, 3dB, 6dB, 9dB, 12dB

ATW

Allows you to assign the ATW (Auto Tracking White 
Balance) function to the WHITE BAL switch. (For 
details, refer to page 56.)
Bch: 

Controls the ATW function when the WHITE BAL 

switch is set to B position. 
OFF: 

Does not assign the ATW function to the WHITE 

BAL switch.  

•  A USER button to which ATW has 

been assigned cannot be used to turn 
ATW off when the WHITE BAL switch is 
set to B position and this menu is set 
to Bch.

ATW TYPE

Selects type of ATW (Auto Tracking White Balance) 
function operation.  
1:

 Standard ATW operation

 Further restricts the color of the light source range 

that is tracked than setting 1.
ATW operation reduces the risk of miscalculating light 
sources.

W.BAL.PRESET

Sets the color temperature assigned to the PRST 
position of the WHITE BAL switch. 
3.2K, 5.6K

____ indicates the factory setting