Panasonic AG-HPX370 User Manual
71
Chapter
4
Adjustments
and
Settings
Settings
for
Recording
Externally Locking the Time Code
The time code generator built into your AG-HPX370P/AG-
HPX371E may be locked to an external generator. It is also
possible to lock an external time code generator to the
internal generator.
HPX371E may be locked to an external generator. It is also
possible to lock an external time code generator to the
internal generator.
Connections for externally locking the
time code (examples)
time code (examples)
As illustrated, both the reference video signals and the time
code must be input.
code must be input.
Example 1: Locking the time code to
external signals
Referencetime
code
Referencevideo
signal
TCIN
GENLOCKIN
NOTE
• In addition to an HD Y reference signal, a composite video
signal can also be input as reference signal.
• Input composite video signals when the system mode is 480i
(576i) (SD) and 720P.
• During HD-Y signal input in 720P system mode, GENLOCK
input for the video signal is applied but the time code is
delayed by 1 field.
delayed by 1 field.
• If the reference GENLOCK input signal becomes irregular
and recording cannot be normally performed, “TEMPORARY
PAUSE IRREGULAR FRM SIG” blinks in red in the viewfinder
and on the LCD screen and the current clip is divided. The
continuity of the time code cannot be guaranteed. Recording
resumes when the signal returns to normal. Recording
will not resume if interval, one-shot or loop recording is in
progress.
PAUSE IRREGULAR FRM SIG” blinks in red in the viewfinder
and on the LCD screen and the current clip is divided. The
continuity of the time code cannot be guaranteed. Recording
resumes when the signal returns to normal. Recording
will not resume if interval, one-shot or loop recording is in
progress.
Example 2: Connecting two or more AG-
HPX370P/AG-HPX371Es with
one another, with one being
used as the reference device.
one another, with one being
used as the reference device.
Referencedevice
VIDEOOUT
TCOUT
TCIN
GENLOCKIN
VIDEOOUT
TCOUT
TCIN
GENLOCKIN
VIDEOOUT
TCOUT
NOTE
• Set the menu option TC VIDEO SYNCHRO to TC IN in the
OUTPUT SEL screen and the menu option GL PHASE to
COMPOSITE in the OTHER FUNCTIONS screen on both units.
COMPOSITE in the OTHER FUNCTIONS screen on both units.
• Setting TC VIDEO SYNCHRO in the OUTPUT SEL screen to TC
IN will supply the time code via TC IN to the next slave device
without delay.
without delay.
• The subcarrier in the VBS signal of the VIDEO OUT connector
of the camera cannot be externally locked.
To externally lock the time code
Follow the steps below.
1
TurnonthePOWERswitch.
2
PositiontheTCGswitchat[F-RUN].
3
SettheCOUNTERbuttontoTC.
4
Supplyaphase-relationshipreference
timecode(thatconformstothetimecode
requirements)andreferencevideosignals
totheTCINandGENLOCKINconnectors,
respectively.
timecode(thatconformstothetimecode
requirements)andreferencevideosignals
totheTCINandGENLOCKINconnectors,
respectively.