Panasonic AG-HPX370 User Manual
78
Chapter
4
Adjustments
and
Settings
Settings
for
Recording
Specialrecordingdisplay
This display appears when the menu option REC
FUNCTION in the RECORDING SETUP screen is set to
INTERVAL, ONE SHOT or LOOP and when PRE REC is
set to ON.
• L–: LOOP (loop recording)
• I–: INTERVAL, ONE SHOT
• P–: PRE REC
This display appears when the menu option REC
FUNCTION in the RECORDING SETUP screen is set to
INTERVAL, ONE SHOT or LOOP and when PRE REC is
set to ON.
• L–: LOOP (loop recording)
• I–: INTERVAL, ONE SHOT
• P–: PRE REC
28 One-clip recording mode display
• 1-CLIP:
Indicates that recording has started for a new
clip in one-clip recording mode.
• 1
CLIP:
Indicates that recordings can be compiled to
a previous clip in one-clip recording mode.
a previous clip in one-clip recording mode.
Center Information Display
The following information displays (for details, refer to
page 76) are provided.
page 76) are provided.
P2 card recording and playback data
indications
indications
•BOS
Beginning of stream. No more data is available in the
rearward playback direction.
rearward playback direction.
•CANNOTPLAY
Appears when playback is disabled.
•CARDERR(1)()(1/):
•CARDERR(1)()(1/):
The number identifies the P2 card that is giving
trouble.
trouble.
•UPDATING:
Reading card data
•CANNOTREC
Appears when recording cannot be started by pressing
the REC button.
the REC button.
•EOS
End of stream. No more data is available in the forward
playback direction.
playback direction.
•PRERECON(OFF)(INVALID)
Appears when the user button to which pre-recording
has been assigned is pressed.
has been assigned is pressed.
•SHOTMARKON(OFF)(INVALID)
SHOT MARK appears when the user button or the lens
RET button to which it has been assigned is pressed.
RET button to which it has been assigned is pressed.
•SLOTSEL(INVALID)
Appears when pressing the user button to which SLOT
SEL is assigned.
SEL is assigned.
•TEXTMEMO(INVALID)
TEXT MEMO appears when the user button or the lens
RET button to which it has been assigned is pressed.
RET button to which it has been assigned is pressed.
Errors and warnings
Errors and warnings appear when something goes wrong
with the camera or a P2 card malfunctions. If the problem
cannot be solved by turning off the camera and turning it
back on, try replacing the card and if that does not help, it
may be necessary to consult your supplier.
•194
with the camera or a P2 card malfunctions. If the problem
cannot be solved by turning off the camera and turning it
back on, try replacing the card and if that does not help, it
may be necessary to consult your supplier.
•194
This error occurs in a 1394 connection or when signal
faults occur.
faults occur.
• 194INITIALERROR: a connection error
• 194INPUTERROR: an input error
• 194INPUTERROR(OTHERFORMAT):
• 194INPUTERROR: an input error
• 194INPUTERROR(OTHERFORMAT):
(different input format)
• COPYINHIBITED:
This indicates that a copy-guarded signal
entered DV format input from the DVCPRO/
DV connector.
entered DV format input from the DVCPRO/
DV connector.
•CLIPDISCONTINUED
This message appears in one-clip recording mode
when conformity errors occur in a complied clip and the
next recording cannot be complied to the clip.
when conformity errors occur in a complied clip and the
next recording cannot be complied to the clip.
•DIRENTRYNGCARD
This message indicates that the directory on the card
has become corrupted and that normal recording
cannot be guaranteed if operation continues. Make a
quick backup of card data and reformat the card.
has become corrupted and that normal recording
cannot be guaranteed if operation continues. Make a
quick backup of card data and reformat the card.
•EXTERNAL194DISCONNECT
This message appears when the menu option 1394
CONTROL in the OTHER FUNCTIONS screen is set to
EXT and recording is attempted without connecting an
external device to the DVCPRO/DV connector.
CONTROL in the OTHER FUNCTIONS screen is set to
EXT and recording is attempted without connecting an
external device to the DVCPRO/DV connector.
•FORMATERR!
This indicates a P2 card that does not meet the P2 card
standard
standard
•INCOMPATIBLECARD
This message indicates that the inserted card does not
meet required standards and cannot be used.
It may also appear when a proxy card is inserted when
the power is on.
meet required standards and cannot be used.
It may also appear when a proxy card is inserted when
the power is on.
•LOWBATTERY
This message indicates that the battery is depleted.
•RECWARNING
This is displayed during a recording error. Do the
recording over. If this does not solve the problem,
consult your supplier.
• CARDERR(1)()(1/): The number indicates the P2
recording over. If this does not solve the problem,
consult your supplier.
• CARDERR(1)()(1/): The number indicates the P2
card that is giving trouble.
• Turn the power off if the warning continues.
• If the warning persists after rerecording, replace
• If the warning persists after rerecording, replace
the card with another card.
• ERROR: Other causes
• OVERMAX#CLIPS: The limit for the number of clips
• OVERMAX#CLIPS: The limit for the number of clips
that can be recorded to one P2 card (up to
1000 clips) has been reached.
1000 clips) has been reached.
• PULLDOWNERROR: Video pull-down sequence
error in a mode such as 24P (25P)
• RECRAMOVERFLOW: Overflow of recording memory
•RUNDOWNCARD
This message indicates that a P2 card has been
overwritten the maximum number of times and that
normal recording cannot be guaranteed if operation
continues.
It is best to replace such P2 cards with a new card.
overwritten the maximum number of times and that
normal recording cannot be guaranteed if operation
continues.
It is best to replace such P2 cards with a new card.
•SYSTEMERROR
This message indicates that a system error has
occurred. This type of error can often be corrected by
turning off the power and turning it back on again.
• CAMMICONERROR: The microprocessor in the
occurred. This type of error can often be corrected by
turning off the power and turning it back on again.
• CAMMICONERROR: The microprocessor in the
camera is not responding.
• PCONTROLERROR: a P2 control error has
occurred.