Panasonic ag-ez50 Operating Guide
13
OPEN / EJECT
1
3
2
4
R E C
SAVE
4
PUSH
TO CLOSE
3
1
2
3
1
1
2
2
Lens Cap and Grip Belt
To protect the Lens surface, attach the Lens Cap. Adjust the length of the
Grip Belt to the size of your hand.
Grip Belt to the size of your hand.
1
Attach the longer loop of the Lens Cap Cord to the Lens
Cap.
Cap.
2
Attach the shorter loop to the Grip Belt.
3
Put your hand through the Grip Belt and adjust the length.
≥The removed Lens Cap can be hooked onto the Grip Belt
1
. (When you
are not recording, be sure to keep the Lens Cap attached to the Lens for
protection.)
protection.)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Attaching the Shoulder Strap
We recommend that you attach the Shoulder Strap before going outdoors to
record so as to avoid dropping the Camera/Recorder.
record so as to avoid dropping the Camera/Recorder.
1
Pass the tip of the Shoulder Strap through the Shoulder
Strap Holder on the Camera/Recorder and pull the Shoulder
Strap.
Strap Holder on the Camera/Recorder and pull the Shoulder
Strap.
2
Fold the tip of the Shoulder Strap, pass it through the
Shoulder Strap Length Adjuster, and pull it.
Shoulder Strap Length Adjuster, and pull it.
≥Pull it out more than 1 inch (2 cm)
2
from the Shoulder Strap Length
Adjuster so that it cannot slip off.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Inserting a Cassette
When power is supplied to the Camera/Recorder, the cassette can be taken
out without turning the Camera/Recorder on.
out without turning the Camera/Recorder on.
1
Slide the [OPEN/EJECT] Lever
3
to the right and pull down
to open the Cassette Compartment.
2
Insert a Cassette.
3
Close the Cassette Compartment and lock the Cassette
Compartment by pressing the [PUSH TO CLOSE] mark.
Compartment by pressing the [PUSH TO CLOSE] mark.
4
Close the Lower Cassette Compartment Cover.
≥For other notes, see page 46.
ª Accidental Erasure Prevention
Opening the accidental erasure prevention slider
4
on the cassette (by
sliding it in the [SAVE] arrow direction) prevents recording. To enable
recording, close the accidental erasure protection slider (by sliding it in the
[REC] arrow direction).
recording, close the accidental erasure protection slider (by sliding it in the
[REC] arrow direction).