Panasonic ag-ez50 Operating Guide
19
1, 3
1, 2
1, 2
VOL/JOG
PUSH
MENU
CLOCK-SET
PUSH MENU TO RETURN
YEAR
:2001
MONTH :OCT
DAY :10
HOUR : 2PM
MINUTE:30
DAY :10
HOUR : 2PM
MINUTE:30
AUDIO-REC
12bit
RETURN
----
SP
LP
INDEX
2HOUR
WIND-CUT
OFF
RECORDING SETUP
PUSH
MENU TO EXIT
REC-SPEED
CAMERA FUNCTIONS
PUSH MENU TO EXIT
1.CAMERA SETUP
2.DIGITAL EFFECT
3.CARD SETUP
4.MULTI-PICTURES
5.RECORDING SETUP
6.DISPLAY SETUP
7.OTHER FUNCTIONS
1
2
REC-SPEED
AUDIO-REC
12bit
16bit
RETURN
----
SP
INDEX
2HOUR
WIND-CUT
OFF
RECORDING SETUP
PUSH
MENU TO EXIT
Setting Date and Time
1
Press the [MENU] Button and rotate the [PUSH] Dial to select
[OTHER FUNCTIONS] >> [CLOCK-SET] >> [YES].
[OTHER FUNCTIONS] >> [CLOCK-SET] >> [YES].
2
Rotate and press the [PUSH] Dial to select [YEAR]/[MONTH]/
[DAY]/[HOUR]/[MINUTE] and set it to a desired value.
[DAY]/[HOUR]/[MINUTE] and set it to a desired value.
≥Year will cycle in the order shown below.
2000
) 2001 ) ... ) 2089 ) 2000 ) ...
3
Press the [MENU] Button to finish setting the date and time.
≥The clock operation starts from [00] seconds.
≥The menu will disappear when the button is pressed again.
≥The menu will disappear when the button is pressed again.
≥It is possible that the built-in clock in the Camera/Recorder may become
inaccurate. Please check the time before recording. If the [
0] Indication is
flashing, charge the internal lithium battery and reset the date and time.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Internal Lithium Battery Recharge
The internal lithium battery sustains the operation of the clock. When the
[
[
0] Indication is lit, the internal lithium battery is near exhaustion.
1
Connect the AC Adaptor to the Camera/Recorder with the
power turned off and then connect to the AC Jack.
power turned off and then connect to the AC Jack.
≥After charging for 4 hours, the built-in lithium battery can power the
clock for approximately 3 months.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
LP Mode
A desired recording speed can be selected with [REC-SPEED] on the
[RECORDING SETUP] Sub-Menu.
1
If LP Mode is selected, the recording time becomes 1.5 times longer
than that of SP Mode.
Although the image quality does not decrease with the LP Mode recording,
mosaic-like noise patterns may appear on a playback image, or some
functions may be restricted.
≥The contents that are recorded in LP Mode are not completely compatible
than that of SP Mode.
Although the image quality does not decrease with the LP Mode recording,
mosaic-like noise patterns may appear on a playback image, or some
functions may be restricted.
≥The contents that are recorded in LP Mode are not completely compatible
with other equipment.
≥Audio Dubbing is not possible with LP Mode. (
l 33)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Audio Recording Mode
The sound quality of the recorded sound can be selected with [AUDIO-REC]
on the [RECORDING SETUP] Sub-Menu.
on the [RECORDING SETUP] Sub-Menu.
2
High quality sound recording is possible with “16bit 48kHz 2 track” Mode.
With the “12bit 32kHz 4 track” Mode, the original sound can be recorded on
2 tracks in stereo, while the other 2 tracks can be used for re-recording.
With the “12bit 32kHz 4 track” Mode, the original sound can be recorded on
2 tracks in stereo, while the other 2 tracks can be used for re-recording.