Panasonic ag-hsc1 User Manual

Page of 140
44
VQT1F36
Recording
ª About auto mode
Set the AUTO/MANUAL/FOCUS switch to 
AUTO, and color balance (white balance) and 
focusing will be adjusted automatically.
– Automatic white balance (l 123)
– Auto focus (l 124)
Depending on the brightness of the subject etc., 
the aperture and shutter speed are automatically 
adjusted for an optimum brightness. 
(The shutter speed is adjusted to a maximum of 
1/250 in recording mode.)
≥Color balance and focus may not be adjusted 
automatically depending on light sources or 
scenes. If so, manually adjust these settings.
– Scene mode setting (l 63)
– White balance setting (l 65)
– Shutter speed setting (l 66)
– Iris/gain value setting (l 66)
– Manual focus setting (l 64)
This function prevents unnecessary recording 
when you forget to pause recording and walk 
with the unit tilted upside down while recording 
continues.
≥If the unit continues to be tilted upside down 
from the normal horizontal position while 
recording motion pictures, it is automatically put 
into recording pause.
Turning the AGS function on/off
¬
Rotate the mode dial to select 
.
Press the MENU button, then select 
[VIDEO]
 #
 [AGS]
 # 
[ON] or [OFF]
 
and press the cursor button.
≥This function’s default setting is [OFF].
≥The AGS function may activate and cause the 
unit to pause the recording if you are recording 
a subject right above or right below you. In 
these cases, set [AGS] to [OFF] then continue 
the recording.
≥Use the recording start/stop button to pause 
the recording. The AGS function is only a 
backup function for when you forget to pause 
the recording. 
≥The time it takes the unit to be put into 
recording pause after being tilted upside down 
varies depending on the operating conditions.
AUTO
MANUAL
FOCUS
Auto Ground-Directional 
Standby (AGS)
VQT1F36_ENG_PP.book  44 ページ  2007年2月26日 月曜日 午前11時29分