Panasonic aj-d610 Operating Guide
– 156 –
Specifications
VTR Section
VTR Video System
(during playback on a standard playback unit)
Bands:
Y; 30 Hz to 5.75 MHz
o
1.0 dB/
p
3.0 dB
S/N ratio:
55 dB
K factor (2T pulse):
Within 2%
Y/C delay:
Within 30ns
VTR Audio System
(during playback on a standard playback unit)
Sampling frequency:
48 kHz (synchronized to video)
Quantization:
16 bits
Frequency response:
20 Hz to 20 kHz
t
1.0 dB (at reference level with OFF setting
for MIC LOWCUT on setting menu)
Dynamic range:
85 dB or more (at 1 kHz, AWTD)
Distortion:
Within 0.1% (at 1 kHz, reference level)
Wow & flutter:
Below measurable limit
Head room:
20 dB
Emphasis:
T1
r
50
¯
s, T2
r
15
¯
s (can be turned ON/OFF)
VTR Tape Travel System
Tape used:
DVCPRO format 1/4-inch M cassette tape
Tape speed:
33.820 mm/sec
Recording/playback time:
Approx. 66 min. (using AJ-P66MP)
FF/REW time:
Approx. 3 min. (using AJ-P66MP)
Connectors
Input
Input
AUDIO IN CH1/CH2
(XLR
·
2, 3 pins, female):
MIC/LINE switchable, balanced, more than 10 kilohms
MIC; Menu setting to
MIC; Menu setting to
p
60,
p
50,
p
40 dBu
LINE; Menu setting to
p
6, 0,
o
4 dBu
MIC IN (XLR, 3 pins, female):
Phantom
o
48 V, balanced, 3 kilohms, Menu setting to
p
60,
p
50,
p
40 dBu
GENLOCK IN/(VIDEO IN) (BNC):
1.0 Vp-p, 75 ohms (signals can be monitored on EVF)
TIME CODE IN (BNC):
0.5 V to 18 Vp-p, high impedance
Output
CAMERA OUT (BNC):
1.0 Vp-p, 75 ohms
VIDEO OUT (BNC):
1.0 Vp-p, 75 ohms
AUDIO OUT
(XLR, 3 pins, male):
o
4 dBu, balanced, low impedance CH1, CH2 or MIX
selectable
TIME CODE OUT (BNC):
1.5 Vp-p, low impedance
PHONES (stereo mini jack)
Other
DC IN (XLR, 4 pins, male):
DC 12 V
DC OUT (4 pins, female):
DC 11 V to 17 V, maximam rated current; 0.1 A
LENS (12 pins)
ECU (6 pins)
ECU (6 pins)
Accessories
Shoulder strap (
q
1), Battery connector (including screws) for supporting Sony battery, AUDIO
LEVEL CH1 control knob (including screw) (
q
1), Holder for an Anton Bauer battery (already
mounted on main unit), Tripod mount adaptor (
q
1), Microphone (with holder) (
q
1)