Panasonic aj-hdc27 User Manual
10
Audio function section (1)
1 MIC IN (microphone input) jack (XLR, 3-pin)
Connect the microphone (optional accessory) here.
The power for the microphone is supplied from this
jack.
The power for the microphone is supplied from this
jack.
2 AUDIO LEVEL CH1/CH2 (audio channel 1 & 2
recording level adjustment) controls
When the AUDIO SELECT CH1/CH2 switch 3 is
set to MAN, the recording level of audio channels 1
and 2 can be adjusted using these controls.
When the AUDIO SELECT CH1/CH2 switch 3 is
set to MAN, the recording level of audio channels 1
and 2 can be adjusted using these controls.
3 AUDIO SELECT CH1/CH2 (audio channel 1 & 2
automatic/manual level adjustment selector)
switch
This is used to select the method for adjusting the
audio levels of audio channels 1 and 2.
AUTO : Set here for automatic adjustment.
MAN : Set here for manual adjustment.
switch
This is used to select the method for adjusting the
audio levels of audio channels 1 and 2.
AUTO : Set here for automatic adjustment.
MAN : Set here for manual adjustment.
4 AUDIO IN (audio input selector) switch
This is used to select the input signals to be
recorded on audio channels 1 and 2.
FRONT : The input signals supplied from the
recorded on audio channels 1 and 2.
FRONT : The input signals supplied from the
microphone which has been connected to
the MIC IN jack 1 are recorded.
the MIC IN jack 1 are recorded.
REAR : The audio input signals supplied from the
audio component which has been
connected to the AUDIO IN CH1/CH2
connectors 5 is recorded.
connected to the AUDIO IN CH1/CH2
connectors 5 is recorded.
5 AUDIO IN CH1/CH2 (audio input channel 1 & 2)
connectors (XLR, 3-pin)
An audio component or microphones are connected
here.
An audio component or microphones are connected
here.
6 LINE/MIC/+48V (line input/mic input/mic input +
48V) selector switch
This is used to switch the audio input signals from
the audio component which has been connected to
the AUDIO IN CH1/CH2 connectors 5.
LINE : The audio input signals from the audio
This is used to switch the audio input signals from
the audio component which has been connected to
the AUDIO IN CH1/CH2 connectors 5.
LINE : The audio input signals from the audio
component serving as the line input are
selected.
selected.
MIC : The audio input signals from the internal
power supply type of microphone are
selected. (The phantom mic power is not
supplied from the unit.)
selected. (The phantom mic power is not
supplied from the unit.)
+48V : The audio input signals from the external
power supply type of microphone are
selected. (The phantom mic power is
supplied from the unit.)
selected. (The phantom mic power is
supplied from the unit.)
7 CUE switch
CH1 : The audio CH1 signals are recorded on the
cue track.
MIX : Audio CH1 and CH2 mixed signals are
recorded on the cue track.
CH2 : The audio CH2 signals are recorded on the
cue track.
<Note>
This switch can be made ineffective using the VTR
MAIN MENU. (See page 99)
This switch can be made ineffective using the VTR
MAIN MENU. (See page 99)
Parts and their functions
5
7
1
2
3
4
6