Panasonic aj-hdc27 User Manual

45

For details, refer to “Warning system” (pages 105 and
106).

Remaining tape display
When there are 21 or more minutes of the tape remaining,
all 7 segments up to the “F” position light.
When there are less than 21 minutes of the tape
remaining, the segments go out one by one in sequence
every 3 minutes.

Remaining battery charge display
If a battery with a digital display (% display) is used, all 7
segments up to the “F” position light when the 70% or
more of the battery charge remains.
When there is less than 70% of the battery charge
remaining, the segments go out one by one in sequence
every time the remaining charge drops by 10%.

: Clogged video head

SERVO: Servo disturbance
HUMID : Formation of condensation on the head drum
SLACK : Problem in tape take-up

Time counter display
This displays the time code, CTL, user’s bit and actual
time.  For the correlation between the items displayed and
the switches, refer to the next section.

: Drop frame mode

SLAVE : External locking of the time code
HOLD : Time code generator in the hold mode (when the

HOLD button has been pressed)

SET

TC or CTL

Time code

F-RUN or R-RUN

UB

User’s bit

CTL

CTL

TC

Time code

UB

User’s bit

<Note>
If the HOLD button is pressed while the DISPLAY
switch is set to UB, “HOLD” on the counter display will
flash for as long as the switch is held down, and the
VITC user’s bit information recorded in the video AUX
area will appear on the counter display.