Panasonic aj-spc700 User Manual

21

During recording or playback, the viewfinder displays
the video image in monochrome. It also displays
warnings, messages, zebra patterns, markers (safety
zone and center markers), etc. 

This switch is used to display the zebra pattern in the
viewfinder.

 Zebra pattern displayed.

OFF:  No zebra pattern displayed.

Used to control the 

 front tally lamp.

HIGH: Front tally lamp brightly illuminated.
OFF: Front tally lamp stays off.
LOW: Front tally lamp dimly illuminated.

Used to adjust the outlines of the video image in the
viewfinder for easier focusing. This does not affect the
signal output from the camera.

Used to adjust the contrast of the video image in the
viewfinder. This does not affect the signal output from
the camera.

Used to adjust the brightness of the video image in the
viewfinder. This does not affect the signal output from
the camera.

This lamp is activated when the 

 TALLY switch is

positioned at [HIGH] or [LOW], and stays on during
recording. It also blinks in synchronisation with the REC
lamp in the viewfinder, and provides alerts.
Use the TALLY switch to change the intensity of the
lamp to ([HIGH] or [LOW]).

This lamp stays illuminated during shooting. It also
blinks in synchronisation with the REC lamp in the
viewfinder, and provides alerts.
When the lever is positioned at [OFF], the back tally
lamp is hidden.

Use this to make adjustments in line with your diopter, in
order to obtain optimum clarity in the viewfinder image. 

Used to attach or remove the viewfinder.

Used to adjust the side-to-side position of the
viewfinder.

Used to adjust the fore-and-aft position of the viewfinder.

For more information, see the instruction manual for the
viewfinder.

!16"

!15"

#,52%2 'PINKUJDQQMࡍ࡯ࠫ㧞㧜㧜㧢ᐕ㧡᦬㧝㧝ᣣޓᧁᦐᣣޓඦ೨㧥ᤨ㧠㧡ಽ