Panasonic aj-spc700 User Manual

26

Pressing either the REC START/STOP button, REC button
on the handle or VTR button at the lens starts recording of
video and sound on the P2 card.
A cluster of data that consists of video and sound generated
through a shooting action, together with such added
information as a voice memo, is called a “clip”.

Even if a P2 card has just been inserted, or the power has
been just turned on, you can start recording using the
internal memory of the AJ-SPC700P. In this case, recording
cannot be stopped until the P2 card is recognised.
If the inserted card is not recognized as a recordable P2
card, the record in internal memory is instantly discarded,
and the message “CANNOT REC” message is displayed on
the viewfinder. 
Press the MODE CHECK button to check P2 card status
(displayed in viewfinder).

The internal memory of your AJ-SPC700P is capable of
storing several seconds of video and sound data coming
from the camera. This capability can be used to record video
and sound several seconds before either the REC START/
STOP button, REC button on the handle or VTR button at
the lens is pressed to start recording. 
To use this function, the menu option PRE REC MODE must
be set to “ON”. The storage duration of the internal memory
can be set from the menu option PRE REC TIME. 
PRE REC MODE and PRE REC TIME menu options can be
found in the REC FUNCTION screen on the SYSTEM
SETTING page.
The function of the menu option PRE REC MODE may be
assigned to a desired user button by using any one of the
menu options USER MAIN SW, USER1 SW, or USER2 SW.
These options can be found in the USER SW screen, which
is accessible from the CAM OPERATION page.

These are the options for PRE REC TIME.

Specify the duration for which data may be recorded
before either the REC START/STOP button, REC
button on the handle or VTR button at the lens is
pressed.

z “P-REC” indication when the “PRE REC MODE” menu

option is set to OFF
After recording is stopped, the “P-REC” indication remains
displayed until all video and sound are recorded on the P2
card, even if the PRE REC MODE menu option is set to
OFF. For more information about the “P-REC” indication,
see “4-7-2 Viewfinder Status Indication Layout”.

z Immediately after the power is turned on, the menu option

PRE REC TIME is selected and/or the storage duration is
changed, the content in internal memory will be undefined.
In these situations, the video or sound will not be recorded
for the duration specified, even if either the REC START/
STOP button, REC button on the handle or VTR button at
the lens is pressed to start recording.

z A P2 card that has been just inserted takes some time to

recognise. In this situation, video or sound may not be
recorded for the duration specified, even if either the REC
START/STOP button, REC button on the handle, or VTR
button at the lens is pressed to start a recording.

z The internal memory does not store video or sound when

a playback or recording review is being performed. For this
reason, no video or sound can be recorded during such
operation.

z When recording starts, the time code indication (TCG)

may be shown as “HOLD” until the P2 card has been
recognised.

z During recording of IEEE1394 input, PRE RECORDING is

not available.

A

A

B

B

C

#,52%2 'PINKUJDQQMࡍ࡯ࠫ㧞㧜㧜㧢ᐕ㧡᦬㧝㧝ᣣޓᧁᦐᣣޓඦ೨㧥ᤨ㧠㧡ಽ