Panasonic SV-AV100 User Guide
NO
mçïÉê=pìééäó
ª Using AC Adaptor
N
Open the DC Input Socket Cover and
connect the DC Input Lead to the [DC IN
4.9V] socket on the SD Video Camera.
connect the DC Input Lead to the [DC IN
4.9V] socket on the SD Video Camera.
O
Connect the AC Cord to the AC Adaptor
and the AC Main socket.
and the AC Main socket.
ª Charging the Battery
Be sure to charge the supplied battery before use.
1
While pressing the
A part, slide it to
remove the Battery Compartment Cover.
2
Press the terminals of the battery onto
the terminals of the Battery Compartment
and set the battery.
the terminals of the Battery Compartment
and set the battery.
≥Fit the battery with its label facing upward.
≥After the battery is set, close the cover.
3
Connect the DC Input Lead to the [DC IN
4.9V] socket on the SD Video Camera.
4.9V] socket on the SD Video Camera.
4
Connect the AC Cord to the AC Adaptor
and the AC Main socket.
and the AC Main socket.
≥Power Lamp 1 flashes, and Charging starts.
≥When recharging, turn the power of the SD Video
Camera off.
5
Wait until Power Lamp
1
goes off.
≥When recharging is completed, Power Lamp 1
goes off.
≥If the Power Lamp flashes quickly (or slowly) when
recharging, recharging is not normal. (
l 78)
THE SOCKET OUTLET SHALL BE
INSTALLED NEAR THE EQUIPMENT AND
SHALL BE EASILY ACCESSIBLE
INSTALLED NEAR THE EQUIPMENT AND
SHALL BE EASILY ACCESSIBLE
.
CAUTION
Danger of explosion if battery is incorrectly
replaced.
Replace only with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to the
manufacturer’s instructions.
replaced.
Replace only with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to the
manufacturer’s instructions.
O
N
1
1
2
4
3
AV100PP.book 12 ページ ２００３年８月２２日 金曜日 午後４時３０分