Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. hd-ag-3dp1
  5. User Manual

Panasonic hd-ag-3dp1 User Manual

Download
Page of 140
111
Chapter

Men
u
Oper
ations
Item
Setting
Notes
MASTER PED
Adjusts the black master pedestal that serves as the 
video reference. 
–100  ... +15 ...  +100
•  Hold down the JOG dial button and 
turn it downwards or upwards and 
maintain this position to quickly 
change values.
•  When a remote control unit (AJ-
RC10G) or extension control unit (AG-
EC4G) is connected, use the M-PED 
control on the remote control unit or 
extension control unit to adjust.
A. IRIS LEVEL
Sets the AUTO IRIS target value. 
–10  ... 0 ...  +10
GAMMA
Selects the gamma curve. 
HD NORM: 
Gamma setting for HD recording. 
LOW:  
Applies a gently rising gamma curve to low-
brightness areas for a balanced look. 
HIGH: 
Applies a steep gamma curve to low brightness 
areas to expand the tonality of dark areas for video 
with greater brightness. Contrast softens as a result. 
B.PRESS: 
Produces sharper contrast than LOW. 
CINE-LIKE D: 
Applies a gamma curve to produce 
video with a cine-like feel. 
CINE-LIKE V: 
Applies a gamma curve to produce 
high-contrast video with a cine-like feel. 
•  A lens aperture set lower than normal video level 
(approx. 1/2) is recommended when using cine-like 
gamma to enjoy the full benefit of the function. 
KNEE
Sets the compression level (knee point) of the high 
brightness video signals received through the MOS 
sensor to avoid overexposure.
HIGH: 
High setting (compression starts at approx. 
100 %)
MID: 
Medium setting (compression starts at approx. 
90 %)
LOW: 
Low setting (compression starts at approx. 
80 %)
MATRIX
Selects the MATRIX table to reproduce color during 
shooting. 
NORM1: 
Ensures proper color rendition when shooting 
out in the open or under halogen lighting. 
NORM2: 
Produces more vivid colors than NORM1. 
CINE-LIKE: 
Produces a tone similar to movie film. 
NAME EDIT
Edits the name of the selected scene file.
•  No names are set for FILE1 to FILE 6 
with the factory default settings.
SYSTEM SETUP Screen
Item
Setting
Notes
SYSTEM MODE
Specifies the signal format used by this camera.
1080-59.94i, 1080-23.98PsF, 720-59.94P, 1080-50i, 
720-50P
•  When a setting is changed, the message “TURN 
POWER OFF” appears. Then turn the power off and 
turn it back on again. 
•  The factory default setting is 1080-50i 
when the area setting is PAL.
____ indicates the factory setting