Panasonic hd-ag-3dp1 User Manual

4

Chapter

4

Adjustments

and

Settings

for

Recording

Theadjustmentwilltakeeffectinafew

seconds,andthefollowingmessagewill

appear:

•  The adjusted value is automatically stored in the 

selected memory (A or B).

AWB   A   END   3.2K

•  “C TEMP+7” to “C TEMP-7” will appear when C 

TEMP of the scene file is set to the value other 
than 0.

Ifthesubject’scolortemperatureislowerthan

300Korhigherthan00Kthefollowing

messageappears:

•  If the arrow points down (  ) the actual color 

temperature is lower than the temperature 
indicated. If the arrow points up (  ) the actual 
temperature is higher than the temperature 
indicated.

AWB   A   END   2.3K   

 Checktheadjustmentresultsfortheleftand

rightimages,usingtheLCDmonitororthe

connectedmonitor.

•  Left and right adjustments may differ depending 

on the location of a light source or movement of 
the subject.

Position the WHITE BAL switch at PRST.
•  Turning the AUTO W/B BAL switch to AWB toggles the 

color temperature between 3200 K and 5600 K.

When the white balance has not been successfully 
adjusted, the LCD monitor/viewfinder displays an error 
message.

AWB Ach  

(or Bch) NG

The color temperature is too high or 

too low.

LOW LIGHT

There is insufficient light.

The convergence point (reference 

plane) is deviated.

LEVEL OVER

There is too much light.

See [LCD Monitor/Viewfinder Screen Status Displays] 
(page 67).

The black balance must be adjusted when:
•  You use your camera the first time.
•  Your camera has not been used for some time.
•  The ambient temperature has changed substantially.
•  The gain switchover value has been changed.
•  The menu options SYSTEM MODE and REC FORMAT in 

the SYSTEM SETUP screen.

Adjust the black balance before shooting to ensure 
optimum video quality.

Use for automatic control of black balance.

Set to CAM.

TilttheAUTOW/BBALswitchsothatitis

positionedatABB,thenreleaseit.

•  The switch returns to the central position with the 

black balance automatically adjusted.

Duringadjustment,theLCDmonitorand

viewfinderdisplaythefollowingmessage:

ABB   ACTIVE 

Theadjustmentwilltakeeffectinafewseconds

andthefollowingmessagewillappear:

ABB   END 

•  The adjusted value is automatically stored in the 

memory.

