Panasonic HDC-SX5 User Manual

VQT1J42

ª About the remaining battery 

The remaining battery capacity is displayed in 
minutes when using the Panasonic battery that 
you can use for this unit. It may take time to 
display the remaining battery capacity.

≥ The display changes as the battery capacity 

reduces. 

#

#

#

#

.

If there is less than 3 minutes remaining, then 

 will become red. If the battery 

discharges, then 

 will flash.

≥ The remaining battery capacity may not be 

displayed correctly where the temperature is 
low or high or if the battery was not used for a 
long period of time.
To correctly display the remaining battery 
capacity, recharge the battery, discharge it and 
then charge it again. (Even if this operation is 
performed, it may not be possible to display the 
remaining battery capacity correctly if the 
battery was used for a long period of time 
where the temperature is low or high or if the 
battery was repeatedly charged.)

≥ The maximum amount of remaining battery 

capacity able to be indicated is 999 minutes. If 
the actual remaining time exceeds 
999 minutes, the indication will stay green and 
will not change until the remaining time falls 
below 999 minutes. 

≥ The time displayed is an approximation of the 

remaining time your battery will provide useful 
power. The actual time can vary depending on 
your actual use.

≥ When rotating the mode dial to switch modes, 

the time indication will turn off in order to 
recalculate the remaining battery capacity 
time.

≥ When using the AC adaptor or batteries made 

by other companies, the remaining battery 
capacity will not be shown.

≥ Do not use the AC cable with any other 

equipment as it is designed only for this unit. 
Do not use the AC cable from other equipment 
with this unit.

≥ While the DC cable is connected to the AC 

90min

VQT1J42ENG.book  35 ページ  ２００７年７月２０日　金曜日　午前１０時３６分