Panasonic hdc-tm350 User Guide

VQT2H62

Shutter Speed:
Adjust it when recording fast-moving subjects.
Iris:
Adjust it when the screen is too bright or too dark.
≥ Press the FUNCTION button. (

l 69)

≥ When using the viewfinder, press the 

FUNCTION button. (

l 69)

≥ When using the viewfinder, rotate the multi 

manual ring and set it. (

l 69)

: Shutter speed:

1/50 to 1/8000
≥ If [AUTO SLOW SHTR] is set to [ON], the 

shutter speed will be set between 1/25 and 
1/8000.

≥ The shutter speed closer to 1/8000 is faster.
≥ The shutter speed will be set between 1/2 and 

1/2000 in still picture recording mode.

: Iris/Gain value:

# (F16 to F2.0) # OPEN # (0dB to 

18dB)
≥ Value closer to [CLOSE] darken the image.
≥ Value closer to [18dB] brighten the image.
≥ When the iris value is adjusted to brighter than 

[OPEN], it changes to the gain value.

≥ To return to auto setting, press the FUNCTION 

button again. When using a viewfinder, press 
the FUNCTION button to select the 

, rotate 

multi manual ring to select [CANCEL], and 
press the FUNCTION button again.

≥ When setting both the shutter speed and the 

iris/gain value, set the shutter speed and then 
set the iris/gain value.

Manual shutter speed adjustment
≥ When the shutter speed is set lower than 1/12 

in the still picture recording mode, it is 
recommended using a tripod. Also, white 
balance cannot be set. The shutter speed will 
be set to 1/25 when the power is turned on 
again or when the quick start is performed.

≥ If you increase the shutter speed manually, the 

noise on the screen may increase.

≥ You may see a band of light around the object 

that is shining very bright, or having very high 
reflection.

≥ During normal playback, image movement 

may not look smooth.

≥ If you record an extremely bright object or 

record under indoor lighting, colour and screen 
brightness may change or a horizontal line 
may appear on the screen. In this case, record 
in auto mode or set the shutter speed to 1/100 
in areas where the power supply frequency is 
50 Hz, or 1/125 in areas of 60 Hz.

Manual iris/gain adjustment
≥ Luminance level and histogram are displayed 

during the iris adjustment. (

l 64, 65)

≥ If the gain value is increased, the noise on the 

screen increases.

≥ Depending on the zoom magnification, there 

are iris values that are not displayed.

F

1/100

100

1/100