Panasonic NV-GS250 User Guide

Page of 64
Edit mode
40
VQT0N73
≥For more information, refer to the operating 
instructions for your TV set and recorder.
≥When you do not need functional indications or 
date and time indications, press the [OSD] 
button on the remote control for no indication. 
(When you connect the movie camera and a 
recorder with the DV cable, these indications 
may not appear.)
ª
When neither image nor sound from 
the movie camera is output to the TV 
set
≥Check that the plugs are inserted as far as they 
go.
≥Check the connected terminal.
≥When no image is presented on the TV even if 
set [BASIC] >> [AV JACK] >> [OUT/
Ë], set to 
[OUT]. (
-47-
Recording the contents of other 
equipment
You can dub the contents of other equipment to a 
DV cassette or card, and can record TV 
programs.
Set to Tape Playback Mode.
1
Connect the movie camera and other 
equipment.
≥Connect the movie camera and other 
equipment by using the
 AV cable 1.
≥If the recorder has an S-Video terminal, then 
also connect an S-Video cable 
2 (optional). It 
allows you to record clearer image.
2
Set [BASIC] >> [AV JACK] >> [IN/OUT]. 
(Movie camera) 
3
Set [ADVANCE] >> [REC STDBY] >> [YES]. 
(Movie camera)(Only when the Tape 
Recording Mode)
≥The icon appears.
4
Turn the power on and start playback. 
(Other equipment) 
5
Start recording. (Movie camera) 
Recording on a tape:
Move the joystick up to start recording.
Or, while pressing the [
¥
REC] button on the 
remote controller, press the [
1
] button.
Recording on a card:
Press the [PHOTO SHOT] button.
6
Move the joystick of the movie camera 
down or press the [
] button on the remote 
controller to stop recording.
≥While analog input pictures are being 
recorded on a tape or when the movie 
camera is in recording standby mode, the 
photoshot recording is disabled.
7
Stop playback. (Other equipment) 
≥Do not plug or unplug the cable during recording 
or the recording may not be completed properly.
≥Carefully read the operating instructions for your 
TV set and video equipment.
≥By operating as [SETUP] or [ADVANCE] >> 
[AUDIO REC], set the recording sound mode 
([12bit] or [16bit]).
≥If a picture (bilingual video, etc.) containing main 
sound and sub sound has been dubbed, select 
the desired sound by [SETUP] >> [AUDIO OUT] 
on playback.
≥If a picture containing a copyright protection 
signal (copy guard) is recorded, the message 
“COPY PROTECTED” appears when recording 
it on a tape and the picture is distorted by 
mosaic-like patterns at playback.
≥When wide images are input, the display such 
as the menu screen or the operation icon is 
expanded horizontally.
≥If, during recording, an operation such as cue 
playback or slow motion playback is performed 
on external equipment, mosaic-like patterns 
may appear on the picture at playback.
≥If pictures are recorded when TV broadcasting 
signals are weak or pictures are affected by 
noise, they may be distorted or may not even be 
played back.
≥If both the S-Video cable and the AV cable are 
connected, S -Video signal are input 
preferentially.
1
2
[VIDEO OUT]
[AUDIO OUT]
[S-VIDEO OUT]
AV/
S-VIDEO
STOP
V
/REW
STILL ADV
VOL
¥REC
A.DUB
PLAY
PAUSE
FF/
W
STILL ADV
T
W
GS250GN.book  40 ページ  2005年1月26日 水曜日 午後12時17分