Panasonic nv-gs11 User Manual
Editing Mode
-41-
To Play Back the Sound Recorded by 12bit
Audio Dubbing
Set [TAPE PLAYBACK MENU] >> [PLAYBACK]
>> [12bit AUDIO] >> [ST2] or [MIX].
ST1: It plays back only the original sound.
ST2: It plays back only the sound added by Audio
Audio Dubbing
Set [TAPE PLAYBACK MENU] >> [PLAYBACK]
>> [12bit AUDIO] >> [ST2] or [MIX].
ST1: It plays back only the original sound.
ST2: It plays back only the sound added by Audio
Dubbing.
MIX: It plays back both the original sound and the
sound added by Audio Dubbing
simultaneously.
simultaneously.
To Dub Audio While Listening to a
Pre-recorded Sound
When pausing the audio dubbing, set the
[12bit AUDIO] on the [PLAYBACK] Sub-Menu to
[ST2] and you can check the pre-recorded sound.
When a microphone is used for audio dubbing,
use headphones to listen to the pre-recorded
sound while dubbing the audio. (When using
headphones, set [AV JACK] on the [AV IN/OUT]
or [INITIAL] Sub-Menu to [OUT/PHONES].)
When the line input is used, you can dub audio
while listening to the pre-recorded sound from the
speaker.
Pre-recorded Sound
When pausing the audio dubbing, set the
[12bit AUDIO] on the [PLAYBACK] Sub-Menu to
[ST2] and you can check the pre-recorded sound.
When a microphone is used for audio dubbing,
use headphones to listen to the pre-recorded
sound while dubbing the audio. (When using
headphones, set [AV JACK] on the [AV IN/OUT]
or [INITIAL] Sub-Menu to [OUT/PHONES].)
When the line input is used, you can dub audio
while listening to the pre-recorded sound from the
speaker.
≥For other notes concerning this item, see
-52-
.
Copying on an S-VHS (or a VHS)
Cassette
Cassette
(Dubbing)
After connecting the Movie Camera and the
VCR as illustrated, start the following
procedures.
After connecting the Movie Camera and the
VCR as illustrated, start the following
procedures.
1 AV Cable
2 S-Video Cable (not supplied)
2 S-Video Cable (not supplied)
1
2
[VIDEO IN]
[AUDIO IN]
[S-VIDEO IN]
AV IN/OUT
MIC
PHONES/
REMOTE
≥Be sure to press the [OSD] Button (
-7-
) on the
Remote Controller prior to copying so that no
indications are visible. Otherwise, the displayed
tape counter and function indications are also
copied.
indications are visible. Otherwise, the displayed
tape counter and function indications are also
copied.
Movie Camera:
1
Insert the recorded Cassette.
VCR:
2
Insert an unrecorded Cassette with an
erasure prevention tab.
≥If various setups (such as external input, tape
erasure prevention tab.
≥If various setups (such as external input, tape
speed, etc.) are required, please refer to the
operating instructions of your VCR.
operating instructions of your VCR.
Movie Camera:
3
Press the [
1] Button to start playback.
VCR:
4
Start recording.
5
Press the Pause or Stop Button to stop
recording.
recording.
Movie Camera:
6
Press the [
∫] Button to stop playback.
Recording the Contents of Other
Equipment
Equipment
After connecting the Movie Camera and the
other equipment as illustrated, start the
following procedures.
other equipment as illustrated, start the
following procedures.
1 AV Cable
2 S-Video Cable (not supplied)
2 S-Video Cable (not supplied)
1
2
AV IN/OUT
[S-VIDEO OUT]
[VIDEO OUT]
[AUDIO OUT]
MIC
PHONES/
REMOTE
15GN-ENG.book 41 ページ ２００４年２月５日 木曜日 午後１０時５５分