Panasonic PV-GS400 User Guide
Before Use
19
3
Close the Cassette Holder by pressing the
[PUSH] mark
[PUSH] mark
1.
4
Close the Cassette Compartment Cover.
ª Accidental Erasure Prevention
Opening the accidental erasure prevention slider
1 on the cassette (by sliding it to the [SAVE]
arrow direction) prevents recording. To enable
recording, close the accidental erasure
prevention slider (by sliding it to the [REC] arrow
direction).
1 on the cassette (by sliding it to the [SAVE]
arrow direction) prevents recording. To enable
recording, close the accidental erasure
prevention slider (by sliding it to the [REC] arrow
direction).
Using a Memory Card
A Card can be used to record pictures.
≥Use a genuine SD Memory Card or
≥Use a genuine SD Memory Card or
MultiMediaCard manufactured by Panasonic
only.
only.
ª Caution before inserting/removing a
Card
Be sure to turn off the Camcorder.
≥Otherwise, the Camcorder may not function
≥Otherwise, the Camcorder may not function
properly or it may cause the loss of recorded
data in a Card.
data in a Card.
ª Inserting a Card
1
1
Slide the [OPEN] Lever
Slot Cover
.
2
While holding the Memory Card with its cut
corner on top
corner on top
1, insert it into the Card Slot.
PUSH
1
R E C
SAVE
1
OPEN
3
Close the Card Slot Cover
securely.
Removing the Card
Open the Card Slot Cover and then pull the Card
straight out.
≥After removing the Card, close the Card Slot
Open the Card Slot Cover and then pull the Card
straight out.
≥After removing the Card, close the Card Slot
Cover.
ª [ACCESS] Lamp
While the Camcorder is accessing the Card
(reading, recording, playback or erasing), the
[ACCESS] Lamp lights up.
≥While the [ACCESS] Lamp is on, never attempt
(reading, recording, playback or erasing), the
[ACCESS] Lamp lights up.
≥While the [ACCESS] Lamp is on, never attempt
to open the Card Slot Cover, to pull out the
Card, to turn off the Camcorder. Such actions
will damage the Card, and recorded data, and
cause the Camcorder to malfunction.
Card, to turn off the Camcorder. Such actions
will damage the Card, and recorded data, and
cause the Camcorder to malfunction.
≥It may take time to record pictures if you use
MultiMediaCard. (The [ACCESS] Lamp stays on
longer. However, this is not a malfunction.)
longer. However, this is not a malfunction.)
Turning on the Camcorder
When the Camcorder is turned on with the Lens
Cap on, the Automatic White Balance Adjustment
may not function properly. Please turn on the
Camcorder after removing the Lens Cap.
Cap on, the Automatic White Balance Adjustment
may not function properly. Please turn on the
Camcorder after removing the Lens Cap.
ª How to Turn on the Power
1
1
Set the [OFF/ON] Switch
to [ON] while
pressing the button
1.
≥The [POWER] Lamp
lights up.
ª How to Turn off the Power
1
1
Set the [OFF/ON] Switch
to [OFF] while
pressing the button
1.
1
ACCESS
OF
F
ON
POWER
1
OF
F
ON
1
PV-GS400Eng.book 19 ページ 2004年6月4日 金曜日 午後3時17分